Intake Air Temp Sensor Reading - ZR-1 Net Registry Forums

Shizap · 08-25-2021

Hey guys,
I recently bought an aldl cable and set up tunerpro. I noticed that my MAT reading from tunerpro is constantly displaying the wrong temperature (10.91 deg C) even if I unplug the sensor. I tried installing a new sensor and I have the same problem. Tomorrow I will replace the connector. I tested the voltage and I am getting 5 volts from the wire. Could this be an issue with my software and the sensor is actually working? If someone has a different 91 ADX file I could try please send to my email at scottycerilli@yahoo.com.

Thanks,
Scott

08-25-2021	#1
Shizap Join Date: Oct 2020 Location: Coweta, Georgia Posts: 53	Intake Air Temp Sensor Reading Hey guys, I recently bought an aldl cable and set up tunerpro. I noticed that my MAT reading from tunerpro is constantly displaying the wrong temperature (10.91 deg C) even if I unplug the sensor. I tried installing a new sensor and I have the same problem. Tomorrow I will replace the connector. I tested the voltage and I am getting 5 volts from the wire. Could this be an issue with my software and the sensor is actually working? If someone has a different 91 ADX file I could try please send to my email at scottycerilli@yahoo.com. Thanks, Scott

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode