ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 General Postings

Reply
 
Thread Tools Display Modes
Old 04-25-2007   #1
GrayZ
 
Join Date: Mar 2006
Location: Innsbrook, Missouri
Posts: 1,727
Default Haibeck, tuned, it's back, Ready for Bowling Green

I thought i'd post some thoughts on my car, how little things can go oh so wrong, and my general state of address:

2 weeks ago i drove my Zr1 to Marc Haibeck, in Chicago, I wanted to get
4:10 viper gears..Keyless Entry, re-locate air temp sensor, one of Marc's chips..(yes, they are worth it) and for him to just fix any small problems,
that he came across, simply said, I trust the man. Yesterday, I flew up,
my arms are still tired, and drove her home. And now am wondering WHY i didn't install 4:10 viper gears before. I am more than happy. After breaking the new gears in by varing my speed and driving.
I am one happy camper. Night and Day. Feels like i have added at least
50 hp.
Marc found 3 vacuum leaks -fixed- I had a problem of some sort in
the transmission, wrong fluids..-fixed- plus the slave cylinder was leaking
badly, replaced, along with a new clutch. i had him install his air duct support hoops and fasten the air box, which allowed me to keep the
stock accordian.fixed
Keyless entry works great...open the hatch and doors with a push of a button, and it makes a little honk and lights flash..nice.
replaced one bad oxygen sensor and he found both cables melted and replaced..fixed...headlight motors...fixed. removed the air pump..10 lbs. gone...re-aligned my exhaust, it seems the shop that installed had the 2 pipes from the cats to the muffler's were upside down and on the wrong side...i was gonna remove the cats and sell them to a friend..but now
need them to make the length of the pipes look right. he sealed the left header stud...& re attached my shifter boot that had come loose.
damn...I had asked Marc, if he ran across any things to fix em
"Like It was His car" and he did...kudo's to Marc, great work, thanks Bro.

the chip made my car idle..really smooth, Marc said as any he's worked on
might be the because mine is an Early production car, #74, built
in august of 89. No more backfires, no high idle..now a real pleasure to
drive...

If you ever engage the security system..and it honks and flashes for like
3 minutes in the parking lot of a Wal-Mart
.a keyless fob will not stop it
from honking...you must put the key in the door..

I'm really looking forward to Bowling Green, I may not be the fastest.
but after my drive yetereday...who gives a fat rats...azz.
GrayZ is offline   Reply With Quote
Old 04-25-2007   #2
DaveK
 
Join Date: Jul 2004
Location: Sudbury, Ontario. Canada
Posts: 1,538
Default Re: Haibeck, tuned, it's back, Ready for Bowling Green

Congratulations. Must be great to know everything is 100% with your drive!
__________________
1991 #1516 Black/Black

davidmkelly.com

"Speed is often confused with insight." - Johan Cruijff
DaveK is offline   Reply With Quote
Old 04-25-2007   #3
bobbyhi
 
bobbyhi's Avatar
 
Join Date: Jul 2005
Location: Mendota Heights, MN. 55120
Posts: 984
Default Re: Haibeck, tuned, it's back, Ready for Bowling Green

Keith - was he working on the white one next to you????
__________________
Bob Anderson
1990 #2405 White/Gray
Haibeck chip,4:09 gears,Power Effects Exhaust,5 spoke chrome,C5 brakes,49th Street rockers,K&N,Hurst,Headers,Upper & lower ported

Minnesota State Director
Founding Member #19
bobbyhi is offline   Reply With Quote
Old 04-25-2007   #4
zr-1assassin
 
zr-1assassin's Avatar
 
Join Date: Feb 2007
Location: saint joseph,mo.
Posts: 279
Default Re: Haibeck, tuned, it's back, Ready for Bowling Green

i called mark yesterday to order the chip and he told me someone just left his shop from missouri (some crazy guy)...... now i know! i also asked about the gears and he told me they were not viper gears (because of the cost) but they are basically the same thing and just as good. sounds like your pleased with the gears and it sounds like mr. haibeck can finally put in that swimming pool cant wait to check it all out at B.G.
zr-1assassin is offline   Reply With Quote
Old 04-25-2007   #5
GrayZ
 
Join Date: Mar 2006
Location: Innsbrook, Missouri
Posts: 1,727
Cool Re: Haibeck, tuned, it's back, Ready for Bowling Green

Quote:
Originally Posted by bobbyhi
Keith - was he working on the white one next to you????
uuuhhhh...i'm glad you brought that subject up Bobby..

those 49th street rocker panels... and the blue tinted
roof panel.. you had, on you're car...
i told Marc, he probably would like to brag he has the only
convertible Zr1 in Minnesota..and those damn rocker panels..well
i thought with the clearance problems...and all you wouldn't miss em.

It was a sight to behold...3 white zr1's in one shop, at the same time.
your's almost complete..another from missouri, almost complete..and
one from New York, in for just an oil change.
GrayZ is offline   Reply With Quote
Old 04-25-2007   #6
Artic93
 
Artic93's Avatar
 
Join Date: Aug 2006
Location: Columbia, Missouri
Posts: 116
Default Re: Haibeck, tuned, it's back, Ready for Bowling Green

What is the general turn around on his work there, is it possible to drive up and stay with the car or are we talking 7-10 days of work? Depending on what you have done ofcourse.
Artic93 is offline   Reply With Quote
Old 04-25-2007   #7
bobbyhi
 
bobbyhi's Avatar
 
Join Date: Jul 2005
Location: Mendota Heights, MN. 55120
Posts: 984
Default Re: Haibeck, tuned, it's back, Ready for Bowling Green

Quote:
Originally Posted by Artic93
What is the general turn around on his work there, is it possible to drive up and stay with the car or are we talking 7-10 days of work? Depending on what you have done ofcourse.

Best thing to do is call Marc and schedule an appointment.
__________________
Bob Anderson
1990 #2405 White/Gray
Haibeck chip,4:09 gears,Power Effects Exhaust,5 spoke chrome,C5 brakes,49th Street rockers,K&N,Hurst,Headers,Upper & lower ported

Minnesota State Director
Founding Member #19
bobbyhi is offline   Reply With Quote
Old 04-25-2007   #8
FU
 
FU's Avatar
 
Join Date: Mar 2004
Location: Found Member
Posts: 4,346
Default Re: Haibeck, tuned, it's back, Ready for Bowling Green

Marco treat's all the car's with care......like if they were his own. When they get back from his place. The car's are in super shape.
Now about that oil change
__________________
Frank Urbo.

NCM Lifetime member # 982
Registry Founding # 237
FU is offline   Reply With Quote
Old 04-25-2007   #9
Kevin
 
Kevin's Avatar
 
Join Date: Jun 2005
Location: pittsburgh
Posts: 4,632
Default Re: Haibeck, tuned, it's back, Ready for Bowling Green

Quote:
Originally Posted by Artic93
What is the general turn around on his work there, is it possible to drive up and stay with the car or are we talking 7-10 days of work? Depending on what you have done ofcourse.
I'm sure you could if you were getting headers or something like that installed
__________________
It's not the car, it's the people - Doug Johnson
90 r/r "KEYS ON" nick named "T.L.B"
Kevin is offline   Reply With Quote
Old 04-25-2007   #10
bobbyhi
 
bobbyhi's Avatar
 
Join Date: Jul 2005
Location: Mendota Heights, MN. 55120
Posts: 984
Default Re: Haibeck, tuned, it's back, Ready for Bowling Green

Quote:
Originally Posted by Kevin
I'm sure you could if you were getting headers or something like that installed
Marc is putting headers on mine as we speak. Marc told me the lead time for headers is getting longer (I think he said 4-6 weeks). He then has them coated and then shipped to him. I really don't know how long it takes to tune them once installed.
__________________
Bob Anderson
1990 #2405 White/Gray
Haibeck chip,4:09 gears,Power Effects Exhaust,5 spoke chrome,C5 brakes,49th Street rockers,K&N,Hurst,Headers,Upper & lower ported

Minnesota State Director
Founding Member #19
bobbyhi is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:36 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020