ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 10-30-2018   #1
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,704
Default A tuning tale: BLMs say lean, plugs say rich

Trying to dial in the tune on the LT5. Just when I seem to be close to finalizing based on BLMs, I pull plugs and they don’t indicate what the BLMs are saying. Specifically, my plugs are a very dark brown suggesting the tune is rich but the BLMs are reading in the 133-135 range. I’m tuning to within a +/- of 3 to 128. The heads and top end have been ported, larger cams, and 3” exhaust w headers.
Here’s a pic of the NGK BKR5E-11 I am using. They’re gapped at .044”. The darker one is from the passenger side bank, the lighter from driver’s side.
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman
Former ZR-1 Registry - BOD
1972 Corvette 4speed base Coupe SOLD long time ago
1984 Corvette Z-51/4+3 SOLD
1992 Corvette ZR-1 Aqua/Gray #474 SOLD
1992 Corvette ZR-1 Black Rose/Cognac #458
2014 Honda VFR Interceptor DX

Last edited by XfireZ51; 03-08-2024 at 03:09 PM.
XfireZ51 is offline   Reply With Quote
Old 10-31-2018   #2
jss06c6
 
Join Date: Aug 2015
Location: Magnolia, Texas
Posts: 884
Default Re: A tuning tale: BLMs say lean, plugs say rich

Dominic,

This is interesting.. I've got my '91 dialed in to 128 on driver side and 133 on passenger side. Haven't made any PE changes yet, but the first pull on our new Dyno showed the engine to be very rich. Raw fuel spraying out of the exhaust! Still made 359/405 on a loaded Dyno. There is a lot left in the engine, but I'm still intrigued as to why, after porting and the engine is so rich at WOT. BLM's we're running 138-145 after porting using un-ported tune.

Watching and learning!

Steve

Sent from my XT1585 using ZR-1 Net Registry mobile app
jss06c6 is offline   Reply With Quote
Old 10-31-2018   #3
Ccmano
 
Ccmano's Avatar
 
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,852
Default Re: A tuning tale: BLMs say lean, plugs say rich

Quote:
Originally Posted by XfireZ51 View Post
Trying to dial in the tune on the LT5. Just when I seem to be close to finalizing based on BLMs, I pull plugs and they don’t indicate what the BLMs are saying. Specifically, my plugs are a very dark brown suggesting the tune is rich but the BLMs are reading in the 133-135 range. I’m tuning to within a +/- of 3 to 128. The heads and top end have been ported, larger cams, and 3” exhaust w headers.
Here’s a pic of the NGK BKR5E-11 I am using. They’re gapped at .044”. The darker one is from the passenger side bank, the lighter from driver’s side.
Air leak before or near the O2 sensor?
H
__________________
90'ZR-1 #1461 Red/Black
Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold
08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold
05 C6 Z51 Red/Black Sold
90'ZR-1 #1723 Black/Gray Sold but not forgotten
91' Z51 L98 White Vert. My First, you always remember your first. Sold.
Ccmano is offline   Reply With Quote
Old 10-31-2018   #4
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,704
Default Re: A tuning tale: BLMs say lean, plugs say rich

Quote:
Originally Posted by Ccmano View Post
Air leak before or near the O2 sensor?
H
No Hans. I logged before and after O2 sensor change. No significant difference.
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman
Former ZR-1 Registry - BOD
1972 Corvette 4speed base Coupe SOLD long time ago
1984 Corvette Z-51/4+3 SOLD
1992 Corvette ZR-1 Aqua/Gray #474 SOLD
1992 Corvette ZR-1 Black Rose/Cognac #458
2014 Honda VFR Interceptor DX
XfireZ51 is offline   Reply With Quote
Old 10-31-2018   #5
Ccmano
 
Ccmano's Avatar
 
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,852
Default Re: A tuning tale: BLMs say lean, plugs say rich

Quote:
Originally Posted by XfireZ51 View Post
No Hans. I logged before and after O2 sensor change. No significant difference.
Understood, but changing out the O2 sensor does mean you don’t also have a leak somewhere that hasn’t been resolved. That said a leak would affect one side or the other if it’s in the exhaust..
H
__________________
90'ZR-1 #1461 Red/Black
Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold
08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold
05 C6 Z51 Red/Black Sold
90'ZR-1 #1723 Black/Gray Sold but not forgotten
91' Z51 L98 White Vert. My First, you always remember your first. Sold.
Ccmano is offline   Reply With Quote
Old 10-31-2018   #6
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,704
Default Re: A tuning tale: BLMs say lean, plugs say rich

Quote:
Originally Posted by jss06c6 View Post
Dominic,

This is interesting.. I've got my '91 dialed in to 128 on driver side and 133 on passenger side. Haven't made any PE changes yet, but the first pull on our new Dyno showed the engine to be very rich. Raw fuel spraying out of the exhaust! Still made 359/405 on a loaded Dyno. There is a lot left in the engine, but I'm still intrigued as to why, after porting and the engine is so rich at WOT. BLM's we're running 138-145 after porting using un-ported tune.

Watching and learning!

Steve

Sent from my XT1585 using ZR-1 Net Registry mobile app
Steve,

If u enriched up the mixture to keep up w the additional air from the porting, the PE table is still set up for the stock VE tables. With more VE fuel, the PE multiplier are being used over a larger number. The VE and SA tables are the basis for practically everything else. Change them, and other parameters need adjustment because they”feed” off those tables.
One other modification that most don’t know about. The PE will be modified based upon the last Active BLM prior to going into PE mode. Anything over 128, and the ECM will add fuel beyond just what the PE muliple is. So if the motor is running somewhat lean based on the last BLM it sees, then the ECM will add a bit more cushion.
This is if u r tuning in C/L.
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman
Former ZR-1 Registry - BOD
1972 Corvette 4speed base Coupe SOLD long time ago
1984 Corvette Z-51/4+3 SOLD
1992 Corvette ZR-1 Aqua/Gray #474 SOLD
1992 Corvette ZR-1 Black Rose/Cognac #458
2014 Honda VFR Interceptor DX

Last edited by XfireZ51; 10-31-2018 at 06:08 PM.
XfireZ51 is offline   Reply With Quote
Old 10-31-2018   #7
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,704
Default Re: A tuning tale: BLMs say lean, plugs say rich

The motor feels that it likes the BKR5E plug better than the 6E. I tried raising SA again but started to pick up some KC at a steady cruise as I had in a previous datalogs. The Knock occurs during steady cruise at about 1800-2000rpm and shows up when the road begins an incline. In the LT5, AE is based solely on MAP differential not TPS%, so I can maintain a steady foot on the throttle but MAP will change slightly and that’s when I will see the KC increment. So this is why I dropped timing. It was to eliminate the KC at steady speeds. Otherwise I don’t get KCs.
So my question is, did I drop timing to eliminate KC but in the meantime lower timing is giving me a more incomplete burn?
Am I creating s problem trying to solve a lesser problem?
__________________
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman
Former ZR-1 Registry - BOD
1972 Corvette 4speed base Coupe SOLD long time ago
1984 Corvette Z-51/4+3 SOLD
1992 Corvette ZR-1 Aqua/Gray #474 SOLD
1992 Corvette ZR-1 Black Rose/Cognac #458
2014 Honda VFR Interceptor DX
XfireZ51 is offline   Reply With Quote
Old 11-09-2018   #8
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,704
Default Re: A tuning tale: BLMs say lean, plugs say rich

Been out of pocket for a bit so no progress. But, I'll be pulling the plenum here for two reasons: 1. Check to see if I am getting oil seepage into #2 cyl,possibly less in #4. If that proves negative, I will likely be sending injectors for cleaning and flow check. I'll be replacing knock sensor and tensioner since I'll be dropping coolant. Qjacks will be making this an easier chore Stay tuned.
Meantime, I have some new weatherstrip to put on doors.
LET THE WINTER BEGIN.
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman
Former ZR-1 Registry - BOD
1972 Corvette 4speed base Coupe SOLD long time ago
1984 Corvette Z-51/4+3 SOLD
1992 Corvette ZR-1 Aqua/Gray #474 SOLD
1992 Corvette ZR-1 Black Rose/Cognac #458
2014 Honda VFR Interceptor DX
XfireZ51 is offline   Reply With Quote
Old 11-10-2018   #9
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,704
Default Re: A tuning tale: BLMs say lean, plugs say rich

So we move ahead. Before I start tearing into top end of motor, I thought I would first check the injectors thinking perhaps something obvious would show. I ran a resistance check on the injectors. The primaries ranged from 14.6-14.8 ohms, while the secondaries ohm'd out at 14.1-14.3. All pretty consistent. This does not definitively rule out injectors, but its a start. If I don't find evidence of a particular cylinder sucking in a bit of oil, I'll have the injectors cleaned and flow tested. This MAY have some relation to getting knock counts during cruise.
If I'm running rich in one bank, I would be tuning to balance that out causing possibly the opposite bank to be running a bit lean which, again, MAY induce knock on accelerator position change.
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman
Former ZR-1 Registry - BOD
1972 Corvette 4speed base Coupe SOLD long time ago
1984 Corvette Z-51/4+3 SOLD
1992 Corvette ZR-1 Aqua/Gray #474 SOLD
1992 Corvette ZR-1 Black Rose/Cognac #458
2014 Honda VFR Interceptor DX

Last edited by XfireZ51; 11-10-2018 at 06:35 PM.
XfireZ51 is offline   Reply With Quote
Old 11-11-2018   #10
WARP TEN
 
WARP TEN's Avatar
 
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,089
Default Re: A tuning tale: BLMs say lean, plugs say rich

This may be a little out of left field, but have you tried a slightly higher heat range of plugs? Maybe your plugs are running a little cool for your most typical driving and a change might show less discoloration. --Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z"
1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts
--Sold but still running strong
1993 Quasar Blue #161 "HIL KING"
--Sold but still running strong, now with more than 120,000 miles
1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd
--Sold a long time ago
ZR-1 Net Registry Founding Member #95
NCM Lifetime Member
Favorite Quote--Attributed to Mickey Thompson:
"Too Much Horsepower is Almost Enough"
WARP TEN is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:48 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020