|
10-01-2018
|
#1 |
Join Date: May 2013
Location: Chicago
Posts: 983
|
Aluminum gas pedal mount.
I broke my gas pedal at the drag strip.
I found this site for an aftermarket petal mount. http://www.uniquecutting.com/products Hope this helps. I got the petal mount off but my hands are too big to grab and dismount the entire pedal. Why buy another plastic pedal that will break? Plus it seems easier to get the mount off with a dremel than remove the entire pedal.
__________________
1993 ZR-1 #211 Yellow On Beige Beast #2 1992 ZR-1 #427 Black On Black *Sold* 1985 L98 Blue On Blue *Sold* Last edited by Karl; 10-01-2018 at 01:57 PM. |
|
|
|
10-01-2018
|
#2 |
   
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,147
|
Re: Aluminum gas pedal mount.
Good find. Thanks for sharing
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
10-01-2018
|
#3 |
Join Date: Apr 2007
Location: Northern VA
Posts: 2,662
|
Re: Aluminum gas pedal mount.
Installed one these last winter.
A lot more substantial than the stock plastic piece. Sent from my iPhone using ZR-1 Net Registry
__________________
Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake |
|
|
|
|
10-07-2018
|
#4 |
|
Join Date: May 2013
Location: Chicago
Posts: 983
|
Re: Aluminum gas pedal mount.
New pedal mount is in. Very nice piece with all the parts needed for a simple quick installation.
Picture is the foot well of the Z. 
__________________
1993 ZR-1 #211 Yellow On Beige Beast #2 1992 ZR-1 #427 Black On Black *Sold* 1985 L98 Blue On Blue *Sold* |
|
|
|
|
10-08-2018
|
#5 |
 
Join Date: Apr 2017
Location: Wayne Illinois
Posts: 402
|
Re: Aluminum gas pedal mount.
I installed one of these in the Spring. The only issue I had was that I didn't like how much play was in the assembly. The pedal would flop around too much in my opinion.
I added a couple nylon flanged bushings from ACE Hardware and it really tightened up the action of the assembly. I am very happy with it now.
__________________
 91-#1935 Black/black & gray, Haibeck 500 Cams by Pete |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
