|
06-18-2018
|
#1 |
 
Join Date: Mar 2018
Location: Norway
Posts: 345
|
ZR-1 floor mats
Looking for ZR-1 logo floor mats for our 91. Any good tips on where to buy some?
Sent from my SM-G955F using ZR-1 Net Registry mobile app
__________________
Roy Martin 1994 ZR-1 #112 Admiral Blue/Black Dana 4:10 Aluminum flywheel Corsa exhaust Watson headers Haibeck chip 470 HP/399 RWHP 1991 ZR-1 #400 White/Red (SOLD) Dana 4:10 Powder coated engine Haibeck performance chip Borla exhaust |
|
|
|
06-18-2018
|
#2 |
 Join Date: Feb 2011
Location: Clayton, North Carolina
Posts: 1,133
|
Re: ZR-1 floor mats
Try Eckler’s
https://www.ecklerscorvette.com/1992...1991-1994.html Also Check EBay and Amazon for Lloyds Lou
__________________
Lou[COLOR="Red"][B][SIZE="4"][/SIZE][/B][/COLOR] |
|
|
|
|
06-18-2018
|
#3 |
|
Join Date: Feb 2011
Location: Clayton, North Carolina
Posts: 1,133
|
Re: ZR-1 floor mats
The link is just a sample to the location at Eckler’s
Lou
__________________
Lou[COLOR="Red"][B][SIZE="4"][/SIZE][/B][/COLOR] |
|
|
|
|
06-19-2018
|
#4 |
Join Date: Apr 2017
Location: Wayne Illinois
Posts: 402
|
Re: ZR-1 floor mats
__________________
 91-#1935 Black/black & gray, Haibeck 500 Cams by Pete |
|
|
|
|
06-19-2018
|
#5 |
|
Join Date: Mar 2018
Location: Norway
Posts: 345
|
Re: ZR-1 floor mats
Found them here too: https://www.corvettecentral.com/acce...o-lloyd-134145
|
|
|
|
|
06-19-2018
|
#6 |
Join Date: Nov 2016
Location: Norway
Posts: 397
|
Re: ZR-1 floor mats
I've read there can be issues with the thickness of some of these pads, making it hard to press the clutch pedal fully, engaging the clutch safety switch. Just something to be aware of.
__________________
- '90 ZR-1 |
|
|
|
|
06-19-2018
|
#7 |
|
Join Date: Feb 2011
Location: Clayton, North Carolina
Posts: 1,133
|
Re: ZR-1 floor mats
Just checked mine and the mat is 2” below the carpeting height. The curve of the brake pedal makes contact with the firewall well above the interior rug height and obviously the mat.
Lou
__________________
Lou[COLOR="Red"][B][SIZE="4"][/SIZE][/B][/COLOR] |
|
|
|
|
06-19-2018
|
#8 |
|
Join Date: Nov 2016
Location: Norway
Posts: 397
|
Re: ZR-1 floor mats
Never had the issue myself.
http://zr1.net/forum/showthread.php?t=28800
__________________
- '90 ZR-1 |
|
|
|
|
06-20-2018
|
#9 |
 
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,095
|
Re: ZR-1 floor mats
Just an FYI, I was a bit disappointed with the Lloyds mats I got for the tan interior of my '95. I wanted to save the originals and get a matching set of mats to use on a daily basis. The color did not match the rest of the carpet--which the promo said it would--and the material was quite different from the carpet and the original mats. But they still worked fine for daily use keeping the original carpet clean and unworn. Hopefully the quality has improved in the past couple of years. For the new car I got a set of GM Z06 mats which match the originals and were not too expensive. --Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z" 1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts --Sold but still running strong 1993 Quasar Blue #161 "HIL KING" --Sold but still running strong, now with more than 120,000 miles 1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd --Sold a long time ago ZR-1 Net Registry Founding Member #95 NCM Lifetime Member Favorite Quote--Attributed to Mickey Thompson: "Too Much Horsepower is Almost Enough" |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
