Has anyone used Dr Color Chip? - ZR-1 Net Registry Forums

Dds1990 · 07-25-2017

Got a few paint chips, looking for opinions on using Dr Colorchip on BR #0106.

rush91 · 07-25-2017

Its works well.. they matched my paint perfect. The only thing is if the chip / scratch is deep, you may have to put a few coats on. But its easy to use and even has held up to numerous washings and waxes.

Dds1990 · 07-25-2017

Thanks Rush91

conesare2seconds · 07-25-2017

I've used them with success. Deep chips or scratches sometimes take a second coat. Another member recommended Langka and specifically said he got good one-coat coverage. I'll consider both products once I've used up my remaining Dr. Colorchip product. In the meantime I'm happy with the results I get from Dr. C.

Paul Workman · 07-26-2017

A chip down to the primer, I guess would be a deep chip, yes?

I've had great success with the Langka kit. I couldn't see where the repairs were - on a BLACK car. None of this "second coat" stuff for me.

Dds1990 · 07-26-2017

Thanks Fellas, Ive got both of these kits. Ill try Dr Colorchip on the smaller chips and try the Langka on the larger ones.

WARP TEN · 07-26-2017

I also had good success with Dr. Color Chip. It doesn't fill the scratches, merely colors them with matching paint for they are less visible. Works as it is supposed to. For deeper scratches you need to fill, paint and sand/buff smooth. On the recommendation of my detailer, I used Dr. Color Chip on my Polo Green 1995 before I had a paint correction done. It looked like a new car afterward. --Bob

Billy Mild · 07-26-2017

Dr. Colorchip worked great on my White Vette. I actually had a dime size flake of paint come off and it covered it pretty damn well. Highly recommended. Get the squeege and get another microfiber towel and blending towel.

Flyman 27 · 07-30-2017

I've used the DR Colorchip on several cars. For me the key was to use a flat artist type paint brush (Walmart). It went on really smooth. It even worked well to build up the door edges where there were fairly deep chips from door dinging. Sanded with 2000 and a little polish and you could not tell where I did the repairs. I really liked the stuff.

Dds1990 · 07-31-2017

Thanks for all the info...Hopefully get some time this week to try it out and comment on the results.

07-25-2017	#1
Dds1990 Join Date: Jul 2016 Location: INDIANA Posts: 86	Has anyone used Dr Color Chip? Got a few paint chips, looking for opinions on using Dr Colorchip on BR #0106.

07-25-2017	#2
rush91 Join Date: Feb 2016 Location: Carterville Illinois Posts: 852	Re: Has anyone used Dr Color Chip? Its works well.. they matched my paint perfect. The only thing is if the chip / scratch is deep, you may have to put a few coats on. But its easy to use and even has held up to numerous washings and waxes.

07-25-2017	#3
Dds1990 Join Date: Jul 2016 Location: INDIANA Posts: 86	Re: Has anyone used Dr Color Chip? Thanks Rush91

07-25-2017	#4
conesare2seconds Join Date: Jul 2016 Location: Greater St. Louis Posts: 490	Re: Has anyone used Dr Color Chip? I've used them with success. Deep chips or scratches sometimes take a second coat. Another member recommended Langka and specifically said he got good one-coat coverage. I'll consider both products once I've used up my remaining Dr. Colorchip product. In the meantime I'm happy with the results I get from Dr. C.

07-26-2017	#5
Paul Workman Join Date: Nov 2007 Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri Posts: 6,493	Re: Has anyone used Dr Color Chip? A chip down to the primer, I guess would be a deep chip, yes? I've had great success with the Langka kit. I couldn't see where the repairs were - on a BLACK car. None of this "second coat" stuff for me. __________________ Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry

07-26-2017	#7
WARP TEN Join Date: Apr 2007 Location: Lake Bluff, IL Posts: 2,096	Re: Has anyone used Dr Color Chip? I also had good success with Dr. Color Chip. It doesn't fill the scratches, merely colors them with matching paint for they are less visible. Works as it is supposed to. For deeper scratches you need to fill, paint and sand/buff smooth. On the recommendation of my detailer, I used Dr. Color Chip on my Polo Green 1995 before I had a paint correction done. It looked like a new car afterward. --Bob __________________ 2016 Long Beach Red Z06 #10281 "POPS Z" 1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts --Sold but still running strong 1993 Quasar Blue #161 "HIL KING" --Sold but still running strong, now with more than 120,000 miles 1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd --Sold a long time ago ZR-1 Net Registry Founding Member #95 NCM Lifetime Member Favorite Quote--Attributed to Mickey Thompson: "Too Much Horsepower is Almost Enough"

07-26-2017	#8
Billy Mild Join Date: Aug 2014 Location: Kansas City, MO Posts: 838	Re: Has anyone used Dr Color Chip? Dr. Colorchip worked great on my White Vette. I actually had a dime size flake of paint come off and it covered it pretty damn well. Highly recommended. Get the squeege and get another microfiber towel and blending towel. __________________ Looking for a ZR-1 1985 Yamaha RZ350-NOT STOCK 1971 Yamaha AT1-Middle of a restoration

07-30-2017	#9
Flyman 27 Join Date: Apr 2017 Location: Wayne Illinois Posts: 402	Re: Has anyone used Dr Color Chip? I've used the DR Colorchip on several cars. For me the key was to use a flat artist type paint brush (Walmart). It went on really smooth. It even worked well to build up the door edges where there were fairly deep chips from door dinging. Sanded with 2000 and a little polish and you could not tell where I did the repairs. I really liked the stuff. __________________ 91-#1935 Black/black & gray, Haibeck 500 Cams by Pete

07-31-2017	#10
Dds1990 Join Date: Jul 2016 Location: INDIANA Posts: 86	Re: Has anyone used Dr Color Chip? Thanks for all the info...Hopefully get some time this week to try it out and comment on the results.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode