Secondaries actuator solenoid valve

[S.hafsmo]

Can one still acquire the solenoid for the secondaries anywhere? Or are the included in any of the hose kits?

[secondchance]

Looks like Jerry's gasket has them.
http://www.jerrysgaskets.com/actuato...sed-90-95-2d1/

Woops! Is says out of stock.

Bit expensive but White racing products.
http://www.ebay.com/itm/90-95-Corvet...RX1rup&vxp=mtr

[ssrszz4]

Looks like the ones from Jerry's are used

Sent from my XT1585 using ZR-1 Net Registry mobile app

[S.hafsmo]

Appreciate the links, gentlemen, but those are the actuators, and I'm looking for the solenoid.

[Jagdpanzer]

Here in a previous post on the same subject:
http://www.zr1.net/forum/showthread.php?t=11619

[S.hafsmo]

Thanks! Just what I was looking for.

[Z51JEFF]

There are 2 parts,an early and late. The early valve has the small foam filter and the later design has the slip on filter that slips on a nipple on the valve.

[S.hafsmo]

Do you know if the later style will fit? And if, does anyone still sell it?

[A26B]

Originally Posted by S.hafsmo

Do you know if the later style will fit? And if, does anyone still sell it?

Either one will work.

Also, A couple of years ago, I bought 20 of the AC Delco # 214-358 / GM# 1997212 solenoid valve to convert & use for replacements, as per the link provided in post #5.

Every one of them leaked vacuum when tested. The tests were validated against a new OE valve which held vacuum. Needless to say, I abandoned the project until I could find the time to see about making a repair kit to "overhaul" the OE valve. I have not encountered an OE valve that had a faulty solenoid actuator, just leaky.

[S.hafsmo]

Well that's a bit disappointing. I was just about to buy one of those. Surely there must be solenoids one could modify for the purpose? I assume these are molded shut/not serviceable?