06-08-2016 | #1 |
Join Date: Nov 2014
Location: New Jersey
Posts: 361
|
keyless entry
Did anyone buy a c5 key fob or something and connect it to our car? is that possible or does a whole alarm have to be connected?
|
06-08-2016 | #2 |
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,180
|
Re: keyless entry
I don't think that is really feasible to do. The old GM VKE1000 kit was a universal keyless entry kit that had a GM styled remote. I had one on my 89, kit was around $100 when they were available.
I have a DEI Valet kit on my ZR-1, essentially the SAME kit as the VKE1000, a couple slight differences and different remote fobs.. I paid $35 for it and then installed it myself
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Shelby Series 1 - Wilwood Brakes Custom Interior NCM Lifetime Member #978 |
06-08-2016 | #3 |
Join Date: Aug 2014
Location: Kansas City, MO
Posts: 836
|
Re: keyless entry
I have seen that the VKE1000 kit is still around but it is NOS.
How difficult is it to install? I would rather have GM looking remotes vs. aftermarket ones.
__________________
Looking for a ZR-1 1985 Yamaha RZ350-NOT STOCK 1971 Yamaha AT1-Middle of a restoration |
06-08-2016 | #4 |
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,180
|
Re: keyless entry
this is geared towards a 89-older, but will help
http://www.batee.com/corvette/keylessentry/ up to you to make the difficulty decision as I don't know you skill set for installing these. I have installed 4 or 5 alarms and a couple entry kits so it was not bad to me
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Shelby Series 1 - Wilwood Brakes Custom Interior NCM Lifetime Member #978 |
06-08-2016 | #5 |
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,147
|
Re: keyless entry
Since PKE wasn't available till 93 from the factory whatever you have wont be factory anyway. Just get a viper remote entry system without the alarm. It will be in your pocket most of the time who will ever know. I have run that option in 3 c4's to date without a problem. The PKE system from the factory was nothing but problems.
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
06-08-2016 | #6 |
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,180
|
Re: keyless entry
yeah something like this:
https://www.amazon.com/Directed-Elec...=1&*entries*=0 or if you want PKE: https://www.amazon.com/DEI-Passive-A...=1&*entries*=0 EDIT: the 2101L is essentially the VKE-1000.. I mean the wiring is 98% the same. for a fraction of the price. I have that same one, but an older model with older remotes. The trunk button on mine says Aux, I don't have it connected currently, as I use the second pulse of the Unlock for the Hatch release. I might rewire it for the aux wire though
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Shelby Series 1 - Wilwood Brakes Custom Interior NCM Lifetime Member #978 Last edited by -=Jeff=-; 06-08-2016 at 10:42 AM. |
06-08-2016 | #7 |
Join Date: Aug 2014
Location: Kansas City, MO
Posts: 836
|
Re: keyless entry
It seemed like a lot of people liked the VKE1000 at least from the research I have done. Was the VKE1000 a plug and plug affair for 1993-up cars?
__________________
Looking for a ZR-1 1985 Yamaha RZ350-NOT STOCK 1971 Yamaha AT1-Middle of a restoration |
06-08-2016 | #8 |
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,180
|
Re: keyless entry
no it is not a plugin solution. If it were me I would buy the one I posted.. it is virtually the SAME as the VKE. if I recall there was a member here selling VKE for $200 or close to it..
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Shelby Series 1 - Wilwood Brakes Custom Interior NCM Lifetime Member #978 |
06-09-2016 | #9 |
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,147
|
Re: keyless entry
No it is complex and a lot of wires and was normally a dealer aftermarket install. Today's tech is much better I suggest you listen to -=JEFF=- he knows what he is talking about. He has done a few electronic projects for me in the past.
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
06-09-2016 | #10 |
Join Date: Aug 2014
Location: Kansas City, MO
Posts: 836
|
Re: keyless entry
I can do stereo installs, but I will leave installing Keyless Entry system to the experts.
When I called a local car audio shop(well recommended BTW), they don't install customer provided hardware. They will only install Viper systems. I was concerned installing a true aftermarket system due to the Key Fobs, and wanting a more "factory" solution. Sounds like ZR-1 guys could care less about having it look factory.
__________________
Looking for a ZR-1 1985 Yamaha RZ350-NOT STOCK 1971 Yamaha AT1-Middle of a restoration |
Thread Tools | |
Display Modes | |
|
|