Is there supposed to be a bolt in this hole? - ZR-1 Net Registry Forums

Racinfan83 · 03-30-2016

Cleaning up underneath before re-installing clutch and tranny - looking at engine trying to determine source of oil leaks. Noticed this hole without a bolt in it - not sure if it had one originally or not. Pic is the best I could get trying to get my phone up in there. It's on the passenger side of engine at the rear, looking up past the cat shield. I think it's on the exhaust manifold.
If there is supposed to be one there I need to fix it before I put bellhousing back on - anyone know what size it is and where to get one?

WVZR-1 · 03-30-2016

It appears to be a bolt for the exhaust manifold and no cars seem to have 100% occupancy with some more than others. Cliff might stop in and offer up some info.

Jerry has bolts and the search function might get you the quantity to "expect to find" or "minimum required".

http://www.jerrysgaskets.com/bolt-ex...old-90-95-1d2/

How did you do with the crankshaft insert?

Racinfan83 · 03-30-2016

I got the correct "blind hole puller" tool from HF yesterday and it worked like a champ. That bushing was in there good though - took me a while to get it worked out with the slide hammer.
There are pulling tools in two different locations in HF - even the employees didn't know where the correct one, 95987, was. They told me that one was with the other pullers but it wasn't - their computer said they had 3 of em - finally the Mgr found the right one somewhere else in the store. It was the one I was originally looking for and because I didn't see it with the rest I figured they didn't have it so I got the cheap one that broke. They took it back though and between that and the 20% coupon I had the thing only cost $40...

Paul Workman · 03-30-2016

The manifold flanges are held against my heads, held with the metric version of "grade-5" hardened metric bolts and lock washers from (of all places) ACE HARDWARE. Knock on wood, but they've stayed in place for 5 years and counting... Oh, hell...NOW I went and said it!!

Racinfan83 · 03-30-2016

Ok, just got an email back from Jerry jerrysgaskets.com The factory placement diagram shows no bolt in that hole. Jerry is THE MAN!

03-30-2016	#1
Racinfan83 Join Date: Apr 2013 Location: Eastern Missouri Posts: 773	Is there supposed to be a bolt in this hole? Cleaning up underneath before re-installing clutch and tranny - looking at engine trying to determine source of oil leaks. Noticed this hole without a bolt in it - not sure if it had one originally or not. Pic is the best I could get trying to get my phone up in there. It's on the passenger side of engine at the rear, looking up past the cat shield. I think it's on the exhaust manifold. If there is supposed to be one there I need to fix it before I put bellhousing back on - anyone know what size it is and where to get one? __________________ [LEFT][SIGPIC][/SIGPIC][/LEFT] [CENTER][COLOR=Indigo][SIZE=4][I][B] Now Sold 1990 ZR-1 #2093, Black on Black..[/B][/I][/SIZE][/COLOR][/CENTER]

03-30-2016	#2
WVZR-1 Join Date: Oct 2004 Posts: 1,890	Re: Is there supposed to be a bolt in this hole? It appears to be a bolt for the exhaust manifold and no cars seem to have 100% occupancy with some more than others. Cliff might stop in and offer up some info. Jerry has bolts and the search function might get you the quantity to "expect to find" or "minimum required". http://www.jerrysgaskets.com/bolt-ex...old-90-95-1d2/ How did you do with the crankshaft insert?

03-30-2016	#3
Racinfan83 Join Date: Apr 2013 Location: Eastern Missouri Posts: 773	Re: Is there supposed to be a bolt in this hole? I got the correct "blind hole puller" tool from HF yesterday and it worked like a champ. That bushing was in there good though - took me a while to get it worked out with the slide hammer. There are pulling tools in two different locations in HF - even the employees didn't know where the correct one, 95987, was. They told me that one was with the other pullers but it wasn't - their computer said they had 3 of em - finally the Mgr found the right one somewhere else in the store. It was the one I was originally looking for and because I didn't see it with the rest I figured they didn't have it so I got the cheap one that broke. They took it back though and between that and the 20% coupon I had the thing only cost $40... __________________ [LEFT][SIGPIC][/SIGPIC][/LEFT] [CENTER][COLOR=Indigo][SIZE=4][I][B] Now Sold 1990 ZR-1 #2093, Black on Black..[/B][/I][/SIZE][/COLOR][/CENTER]

03-30-2016	#4
Paul Workman Join Date: Nov 2007 Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri Posts: 6,493	Re: Is there supposed to be a bolt in this hole? The manifold flanges are held against my heads, held with the metric version of "grade-5" hardened metric bolts and lock washers from (of all places) ACE HARDWARE. Knock on wood, but they've stayed in place for 5 years and counting... Oh, hell...NOW I went and said it!! __________________ Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry

03-30-2016	#5
Racinfan83 Join Date: Apr 2013 Location: Eastern Missouri Posts: 773	Re: Is there supposed to be a bolt in this hole? Ok, just got an email back from Jerry jerrysgaskets.com The factory placement diagram shows no bolt in that hole. Jerry is THE MAN! __________________ [LEFT][SIGPIC][/SIGPIC][/LEFT] [CENTER][COLOR=Indigo][SIZE=4][I][B] Now Sold 1990 ZR-1 #2093, Black on Black..[/B][/I][/SIZE][/COLOR][/CENTER]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode