Finally installed the Momo wheel and NRG quick release - ZR-1 Net Registry Forums

HAWAIIZR-1 · 10-11-2015

Well, I first I was supposed to go to the Vegas Gathering but had to cancel due to training for work at Fort Lewis. Then due to continuing resolution and no budget for the government my training was cancelled on Monday. So I had some time to install the steering wheel components purchased about 3 years ago while in Japan.

Here is the install link I used:

http://www.corvetteforum.com/forums/...tall-96-a.html

It takes about an hour to do if you have everything on hand. The NRG like other quick releases has two levers that you pull forward toward driver and there is a safety button to release the wheel. It provides an added theft deterrent as well as very easy to enter and exit the vehicle.

http://getnrg.com/products/quick-release

I purchased the parts from Crowder Customizing and Jason Howard knows his stuff to provide tech support or advice about different hubs. They also give military discounts.

NRG SRK-170H hub adapter (matte black)
NRG SRK-200BK QR adapter (matte black)
SRK-101MB Quick lock (matte black)
Steering wheel of your choice

http://www.crowderscustomizing.com/

Here is after the install with NRG hub locked.

Momo Competition wheel installed.

Another angle to show the NRG hub and quick release.

With the help of a post on the other forum, it made it so easy to install and no air bag light with the addition of a resistor. The horn works great too. I love the look and feel of this size wheel and grip, as well as the position of the wheel is just right now.

RussMcB · 10-11-2015

That's very nice. I'll bet it feels great.

HAWAIIZR-1 · 10-11-2015

Quote:

Originally Posted by RussMcB

That's very nice. I'll bet it feels great.

Thanks for your thoughts Russ! I do love it and can't believe I waited so long when it is so easy to install.

secondchance · 10-11-2015

That's one pristine interior! Momo looks fantastic too!

HAWAIIZR-1 · 10-11-2015

Quote:

Originally Posted by secondchance

That's one pristine interior! Momo looks fantastic too!

Thanks for your thoughts Yun! Sorry, I did not clean up a few specks on the mats...lol.

Gunny · 10-12-2015

Nice !!!!

ZZZZZR1 · 10-12-2015

That looks like RICKY'S CAR!!

Very nice Craig!!

I'll post up pictures of my new interior this week

David

HAWAIIZR-1 · 10-12-2015

Quote:

Originally Posted by Gunny

Nice !!!!

Thanks George!

Quote:

Originally Posted by ZZZZZR1

That looks like RICKY'S CAR!!

Very nice Craig!!

I'll post up pictures of my new interior this week

David

Thanks David. That can't be, Ricky the King of Bling? I have no bling other than my TWM Performance stainless shift knob...ha, ha. Can't wait to see your new interior.

carter200 · 10-12-2015

Craig, looks great!

HAWAIIZR-1 · 10-13-2015

Quote:

Originally Posted by carter200

Craig, looks great!

Mahalo for your thoughts Carter!

10-11-2015	#1
HAWAIIZR-1 Join Date: May 2010 Location: Japan Posts: 3,582	Finally installed the Momo wheel and NRG quick release Well, I first I was supposed to go to the Vegas Gathering but had to cancel due to training for work at Fort Lewis. Then due to continuing resolution and no budget for the government my training was cancelled on Monday. So I had some time to install the steering wheel components purchased about 3 years ago while in Japan. Here is the install link I used: http://www.corvetteforum.com/forums/...tall-96-a.html It takes about an hour to do if you have everything on hand. The NRG like other quick releases has two levers that you pull forward toward driver and there is a safety button to release the wheel. It provides an added theft deterrent as well as very easy to enter and exit the vehicle. http://getnrg.com/products/quick-release I purchased the parts from Crowder Customizing and Jason Howard knows his stuff to provide tech support or advice about different hubs. They also give military discounts. NRG SRK-170H hub adapter (matte black) NRG SRK-200BK QR adapter (matte black) SRK-101MB Quick lock (matte black) Steering wheel of your choice http://www.crowderscustomizing.com/ Here is after the install with NRG hub locked. Momo Competition wheel installed. Another angle to show the NRG hub and quick release. With the help of a post on the other forum, it made it so easy to install and no air bag light with the addition of a resistor. The horn works great too. I love the look and feel of this size wheel and grip, as well as the position of the wheel is just right now. __________________ Craig "ZR-1 NO KA 'OI" "ZR-1 ICHIBAN" 1995 #228 Black/Black with Dunn Heads ZR-1 owner since September 2003 ZR-1 Net Registry Founding Member #0074 NCM Lifetime Member #2048 Last edited by HAWAIIZR-1; 10-13-2015 at 10:12 AM.

10-11-2015	#2
RussMcB Join Date: Jan 2015 Location: Marietta, GA USA Posts: 1,160	Re: Finally installed the Momo wheel and NRG quick release That's very nice. I'll bet it feels great.

10-11-2015	#4
secondchance Join Date: Aug 2006 Location: McLean, VA Posts: 3,723	Re: Finally installed the Momo wheel and NRG quick release That's one pristine interior! Momo looks fantastic too!

10-12-2015	#6
Gunny Join Date: May 2005 Location: Georgia Mountains Posts: 927	Re: Finally installed the Momo wheel and NRG quick release Nice !!!!

10-12-2015	#7
ZZZZZR1 Banned BANNED Join Date: Oct 2006 Location: MD Posts: 3,690	Re: Finally installed the Momo wheel and NRG quick release That looks like RICKY'S CAR!! Very nice Craig!! I'll post up pictures of my new interior this week David

10-12-2015	#9
carter200 Join Date: Jun 2004 Location: Texas Posts: 2,431	Re: Finally installed the Momo wheel and NRG quick release Craig, looks great! __________________ 95 ZR-1 BLK/Gry #392 LT5 Reg# 868 RIP ZR1NET Founding Mem #155

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode