Refurbing a set of wheels - ZR-1 Net Registry Forums

Billy Mild · 08-27-2015

What is the preferred method of restoring a set of wheels, paint or powdercoat? I'm torn as to which method would be best. Paint has some pro's as it is cheap, and easy to do. Powdercoating needs to be done by a professional.

WVZR-1 · 08-27-2015

Quote:

Originally Posted by Billy Mild

What is the preferred method of restoring a set of wheels, paint or powdercoat? I'm torn as to which method would be best. Paint has some pro's as it is cheap, and easy to do. Powdercoating needs to be done by a professional.

I believe that the finish is more controlled with a solvent based product and sprayed. PC is kind of "what you get is what you got" and also I believe a solvent based product would be much easier to match if the need arises.

I don't believe you could class a solvent based sprayed finish as "CHEAP" or even cheaper than PC.

GOLDCYLON · 08-28-2015

PC as its more resistant to chips than paint.

efnfast · 08-29-2015

I'd powder coat. As GC said, much tougher than paint.

WVZR-1 · 08-29-2015

Quote:

Originally Posted by GOLDCYLON

PC as its more resistant to chips than paint.

Quote:

Originally Posted by efnfast

I'd powder coat. As GC said, much tougher than paint.

I believe that tougher could be debated. Yes it's "generally assumed". Always? It would depend upon the quality of the product and of course the prep etc.

I've had several wheels done by "Ye Ole Wheel Shop" and all were painted. I had a couple sets done by other wheel refinishers/repair facilities and both times it was suggested by them to do paint. Both of them offer PC or paint.

HAWAIIZR-1 · 08-29-2015

IMHO, I think it depends on the design and material of the wheel. I have PC'd my factory 90 wheels and CCW Classic centers, but painted my Dymags by Ye Ole Wheel (awesome work by the way). When I took my 90 wheels to get PC'd, the company was not sure if it was a good candidate for PC. They told me they would blast and bake first to see what kind of outgassing reaction before commitment (I liked that). Once that was done they determined no problem and I did the prep work of special heat tape (green) to save on labor as it was very tedious for that wheel since I wanted to keep the lip uncoated. For my CCW 3 piece wheel it was easy to separate and PC the center piece so I did that for durability as mentioned by others (6 years later still looks like new). For the Dymag I had no choice due to the magnesium material and outgassing so it was painted. It has proven pretty durable, but the design of the wheel with deep set lugs, I did make a chip around a lug nut quite easily with the lock key for the type of lug used (will change). I think PC would not have chipped so easily (just my guess). If I were doing my A molds I would ship to Ye Ole Wheel Shop and have them painted. Just sharing my experience and nothing more. Best wishes in your wheel refurb.

Billy Mild · 08-30-2015

I bought emmevette's a molds that were for sale. They are in rough shape that need to be sandblasted then either painted or powder coated. I would like to have the centers be a gloss black and the lip raw aluminum like the Grand Sport wheels are.

WVZR-1 · 08-30-2015

Quote:

Originally Posted by Billy Mild

I bought emmevette's a molds that were for sale. They are in rough shape that need to be sandblasted then either painted or powder coated. I would like to have the centers be a gloss black and the lip raw aluminum like the Grand Sport wheels are.

NO TO THE SANDBLASTING you might seek some local advice from a refinisher/repair facility. A professional restoration would include the machining of the flange of "ALL FOUR" wheels so that when on the car you have a matched set of four. There's no short-cut to this.

Talk to a few and base your decision based on the conversations.

Just be sure to have the wheels spun and checked for being true before you start and mark the wheels in some fashion so that you can ID them when they're returned to you. Your location I'd think should offer you several facilities that can accomplish it. Check with the "higher end dealers" and see who they use for their customers BUT talk to a few. Look at some of their work.

Billy Mild · 08-30-2015

Sandblasting or Sodablasting something that won't hurt the aluminum.

08-27-2015	#1
Billy Mild Join Date: Aug 2014 Location: Kansas City, MO Posts: 838	Refurbing a set of wheels What is the preferred method of restoring a set of wheels, paint or powdercoat? I'm torn as to which method would be best. Paint has some pro's as it is cheap, and easy to do. Powdercoating needs to be done by a professional. __________________ Looking for a ZR-1 1985 Yamaha RZ350-NOT STOCK 1971 Yamaha AT1-Middle of a restoration

08-28-2015	#3
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: Refurbing a set of wheels PC as its more resistant to chips than paint. __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

08-29-2015	#4
efnfast Join Date: Nov 2011 Location: Dunbarton NH Posts: 7,493	Re: Refurbing a set of wheels I'd powder coat. As GC said, much tougher than paint.

08-29-2015	#6
HAWAIIZR-1 Join Date: May 2010 Location: Japan Posts: 3,586	Re: Refurbing a set of wheels IMHO, I think it depends on the design and material of the wheel. I have PC'd my factory 90 wheels and CCW Classic centers, but painted my Dymags by Ye Ole Wheel (awesome work by the way). When I took my 90 wheels to get PC'd, the company was not sure if it was a good candidate for PC. They told me they would blast and bake first to see what kind of outgassing reaction before commitment (I liked that). Once that was done they determined no problem and I did the prep work of special heat tape (green) to save on labor as it was very tedious for that wheel since I wanted to keep the lip uncoated. For my CCW 3 piece wheel it was easy to separate and PC the center piece so I did that for durability as mentioned by others (6 years later still looks like new). For the Dymag I had no choice due to the magnesium material and outgassing so it was painted. It has proven pretty durable, but the design of the wheel with deep set lugs, I did make a chip around a lug nut quite easily with the lock key for the type of lug used (will change). I think PC would not have chipped so easily (just my guess). If I were doing my A molds I would ship to Ye Ole Wheel Shop and have them painted. Just sharing my experience and nothing more. Best wishes in your wheel refurb. __________________ Craig "ZR-1 NO KA 'OI" "ZR-1 ICHIBAN" 1995 #228 Black/Black with Dunn Heads ZR-1 owner since September 2003 ZR-1 Net Registry Founding Member #0074 NCM Lifetime Member #2048

08-30-2015	#7
Billy Mild Join Date: Aug 2014 Location: Kansas City, MO Posts: 838	Re: Refurbing a set of wheels I bought emmevette's a molds that were for sale. They are in rough shape that need to be sandblasted then either painted or powder coated. I would like to have the centers be a gloss black and the lip raw aluminum like the Grand Sport wheels are. __________________ Looking for a ZR-1 1985 Yamaha RZ350-NOT STOCK 1971 Yamaha AT1-Middle of a restoration

08-30-2015	#9
Billy Mild Join Date: Aug 2014 Location: Kansas City, MO Posts: 838	Re: Refurbing a set of wheels Sandblasting or Sodablasting something that won't hurt the aluminum. __________________ Looking for a ZR-1 1985 Yamaha RZ350-NOT STOCK 1971 Yamaha AT1-Middle of a restoration

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode