fidanza bolts - ZR-1 Net Registry Forums

efnfast · 08-13-2015

Looking to confirm that my Fidanza flywheel will need 8 7/16 - 20 x 1.25"

efnfast · 08-13-2015

Anybody know which of Jerry's release bearings I will need? One is for the OEM flywheel, and one is for a #13 Ram. I've got a Fidanza going in.

Paul Workman · 08-13-2015

Steve,

Maybe someone kept records of the specifics, but some tidbits to consider...

The ARP FW bolts for the Fidanza are longer than stock. If I recall, when I ordered mine from ARP, the part NO included the longer bolts and the tap necessary to tap the FW pressure plate holes in the FW after drilling them deeper.

If you are using a replacement LT4 pressure plate, those bolts will need to be shorter, as the LT4 pressure plate bosses are not as thick as the LT5 PP. So, perhaps w/ the LT4 PP, the stock PP bolts may be long enough...IDK (but a question needing answering).

The Veleo is a pull-type TO bearing. The RAM replacement clutch that Bob Gillig presented is a push-type PP, and the TO bearing was a hydraulic 'donut' riding on the transmission nose shaft. Point being, in either case the ZR-1 ZF trans has a larger diameter housing = something to be aware of.

Jerry (Jerry's Gaskets) should be of more help on all of this,

as well as having the parts.

Good luck

efnfast · 08-13-2015

Thanks Paul. All the parts except the flywheel are coming from Jerry. I figured out the throw out bearing issue. I've got a pressure plate, clutch disc and hydraulic throw out coming from Jerry.
From one of the threads I found, stock is a 1 inch bolt with shoulder. It appears the Fidanza needs a 1.25", technically with shoulder. It appears some just use a grade 8 bolt. I've got a call into Fidanza.

efnfast · 08-13-2015

I just spoke to Fidanza, they recommend the OEM bolts. Jerry has them, I'll click the add to cart button.

08-13-2015	#2
efnfast Join Date: Nov 2011 Location: Dunbarton NH Posts: 7,493	Re: fidanza bolts Anybody know which of Jerry's release bearings I will need? One is for the OEM flywheel, and one is for a #13 Ram. I've got a Fidanza going in.

08-13-2015	#3
Paul Workman Join Date: Nov 2007 Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri Posts: 6,493	Re: fidanza bolts Steve, Maybe someone kept records of the specifics, but some tidbits to consider... The ARP FW bolts for the Fidanza are longer than stock. If I recall, when I ordered mine from ARP, the part NO included the longer bolts and the tap necessary to tap the FW pressure plate holes in the FW after drilling them deeper. If you are using a replacement LT4 pressure plate, those bolts will need to be shorter, as the LT4 pressure plate bosses are not as thick as the LT5 PP. So, perhaps w/ the LT4 PP, the stock PP bolts may be long enough...IDK (but a question needing answering). The Veleo is a pull-type TO bearing. The RAM replacement clutch that Bob Gillig presented is a push-type PP, and the TO bearing was a hydraulic 'donut' riding on the transmission nose shaft. Point being, in either case the ZR-1 ZF trans has a larger diameter housing = something to be aware of. Jerry (Jerry's Gaskets) should be of more help on all of this, as well as having the parts. Good luck __________________ Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry

08-13-2015	#4
efnfast Join Date: Nov 2011 Location: Dunbarton NH Posts: 7,493	Re: fidanza bolts Thanks Paul. All the parts except the flywheel are coming from Jerry. I figured out the throw out bearing issue. I've got a pressure plate, clutch disc and hydraulic throw out coming from Jerry. From one of the threads I found, stock is a 1 inch bolt with shoulder. It appears the Fidanza needs a 1.25", technically with shoulder. It appears some just use a grade 8 bolt. I've got a call into Fidanza.

08-13-2015	#5
efnfast Join Date: Nov 2011 Location: Dunbarton NH Posts: 7,493	Re: fidanza bolts I just spoke to Fidanza, they recommend the OEM bolts. Jerry has them, I'll click the add to cart button.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-13-2015	#1
efnfast Join Date: Nov 2011 Location: Dunbarton NH Posts: 7,493	fidanza bolts Looking to confirm that my Fidanza flywheel will need 8 7/16 - 20 x 1.25"