![]() |
#1 |
![]() Join Date: Jan 2015
Location: Illinois
Posts: 83
|
![]()
I have a red 92 ZR1 and was going to try to raise the back of the hood up because the wiper hits when turned on. I noticed that the paint underneath the hood latch is white while the rest of the hood is red with black underside. Is that normal or does that mean my hood used to be white? Also I am having a hard time getting the 1 1/2 nut under the spring latch loose. Is it right hand thread?
Last edited by Bolling; 05-10-2015 at 10:43 AM. |
![]() |
![]() |
![]() |
#2 |
![]() Join Date: Oct 2004
Posts: 1,884
|
![]() |
![]() |
![]() |
![]() |
#3 |
![]() Join Date: Apr 2004
Location: Atlanta, GA
Posts: 2,168
|
![]()
Just had to do one on a car yesterday, We removed the complete assembly and put it in a vice holding on to the welded on nut on the backside, made quick work of it and no issues with marring the plate or hood. The hood was white bare fiberglass under the plate, my guess is they are painted black after the assembly was installed.
__________________
Steve 1990 Steel Blue/Black #2355 1990 Red/Red #1473 1991 Quasar /Black #118 Sold 1991 Turquoise/Black #766 Parted Out 1993 Yellow/White #179 Sold 1990 Black/Gray #1361 Headers/4:10s Sold Last edited by We Gone; 05-10-2015 at 04:28 PM. |
![]() |
![]() |
![]() |
#4 |
![]() Join Date: Jan 2015
Location: Illinois
Posts: 83
|
![]()
Thanks a lot, that helps me out. I didn't want to scratch it up.
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|