|
04-11-2014
|
#1 |
|
Join Date: Mar 2014
Location: Chicagoland
Posts: 23
|
Broke one of the Vacuum Lines - Ideas?
Busted this (blue tape) line removing the plenum. What are my options? (Besides the obvious)
 
__________________
1991 Corvette ZR-1 Black/Gray #539 |
|
|
|
04-11-2014
|
#2 |
 Join Date: Feb 2011
Location: San Marcos CA
Posts: 1,802
|
Re: Broke one of the Vacuum Lines - Ideas?
I would recouple it with a short section of tight fitting vacuum hose. I might also take a trip to the junkyard as most GM cars of this era have tons of that hard line and various rubber connections you might find useful for a repair or modification.
|
|
|
|
|
04-12-2014
|
#3 |
 
Join Date: Jan 2006
Location: Niceville
Posts: 998
|
Re: Broke one of the Vacuum Lines - Ideas?
Autozone or Advance have a vacuum couplings. Tack it in with 3M adhesive--black.
http://m.autozone.com/autozone-mobil...25ry?id=426017 |
|
|
|
|
04-12-2014
|
#4 |
|
Join Date: Mar 2014
Location: Chicagoland
Posts: 23
|
Re: Broke one of the Vacuum Lines - Ideas?
Thanks for the suggestions guys I will take a look, but in this case couplers won't work. The line was broken in two places both were line bends.
I think I have three options. Replace lines, fabricate new, or somehow eliminate the whole thing?
__________________
1991 Corvette ZR-1 Black/Gray #539 |
|
|
|
|
04-12-2014
|
#5 | |
 
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
Re: Broke one of the Vacuum Lines - Ideas?
Quote:
As for eliminating the secondaries, far be it from me to discourage you from that. After "plenum diving" to fix different vacuum problems, I eliminated them when I did my top end P&P and port matching. Nothing but GOOD came from pulling them, but it will require a chip calibration and a simple hard wire precaution on the POWER switch (on 1990 Zs only).
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry |
|
|
|
|
|
04-12-2014
|
#6 |
|
Join Date: Mar 2014
Location: Chicagoland
Posts: 23
|
Re: Broke one of the Vacuum Lines - Ideas?
What is involved in calibrating the chip? I believe that the last owner installed some sort of performance chip. My car is a 1991.
__________________
1991 Corvette ZR-1 Black/Gray #539 |
|
|
|
|
04-12-2014
|
#7 |
|
Join Date: Jun 2013
Location: Toronto
Posts: 783
|
Re: Broke one of the Vacuum Lines - Ideas?
Op Ill be removing my secondaries very soon.. hoping to start pulling the plenum tonight in fact. id be happy to send you mine.
|
|
|
|
|
04-12-2014
|
#8 | |
|
Join Date: Mar 2014
Location: Chicagoland
Posts: 23
|
Re: Broke one of the Vacuum Lines - Ideas?
Quote:
 . Please PM me with details.
__________________
1991 Corvette ZR-1 Black/Gray #539 |
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
