ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 General Postings

Reply
 
Thread Tools Display Modes
Old 06-09-2013   #1
RedrockLT5
 
Join Date: May 2013
Location: Hillsborough, New Jersey
Posts: 11
Default ZR-1 newbie oil change question

Just got my 92 red/red and just love it! Previous owner said oil was changed last fall and with almost no miles on the new oil but think I'll change it just so I know for sure when done last. My question: Need to lift the car a few inches to get oil pan under car so I thought I'd drive it up on my ramps (6 inches of lift), and allow the oil to drain over several hours. WIll this mess up the amount of oil drained and that needs to be replace? I believe it's 8.5 quarts with filter right?

Sorry about the trivial question but I want to do this right.

Thanks for your help
RedrockLT5 is offline   Reply With Quote
Old 06-09-2013   #2
Kevin
 
Kevin's Avatar
 
Join Date: Jun 2005
Location: pittsburgh
Posts: 4,632
Default Re: ZR-1 newbie oil change question

some will tell you it needs to be left to drain over night, but I think that's rubbish. I've let mine drain for a much shorter length of time and always had around to replace ~8 or 9 quarts of oil with the filter.
__________________
It's not the car, it's the people - Doug Johnson
90 r/r "KEYS ON" nick named "T.L.B"
Kevin is offline   Reply With Quote
Old 06-09-2013   #3
WVZR-1
 
Join Date: Oct 2004
Posts: 1,890
Default Re: ZR-1 newbie oil change question

Quote:
Originally Posted by RedrockLT5 View Post
Just got my 92 red/red and just love it! Previous owner said oil was changed last fall and with almost no miles on the new oil but think I'll change it just so I know for sure when done last. My question: Need to lift the car a few inches to get oil pan under car so I thought I'd drive it up on my ramps (6 inches of lift), and allow the oil to drain over several hours. WIll this mess up the amount of oil drained and that needs to be replace? I believe it's 8.5 quarts with filter right?

Sorry about the trivial question but I want to do this right.

Thanks for your help
Every "drain" will or could be different until you develop a procedure and follow it specifically. Your 6" of lift is going to effect yours I'd think for sure. How much? Don't know. Let it drain for a couple hours. Was it full when you "sticked it cold"? Did you stick it cold? If you haven't if the car is on all fours and "cold" with "no starts' stick it and see where you are before you start.
WVZR-1 is offline   Reply With Quote
Old 06-09-2013   #4
RedrockLT5
 
Join Date: May 2013
Location: Hillsborough, New Jersey
Posts: 11
Default Re: ZR-1 newbie oil change question

Quote:
Originally Posted by WVZR-1 View Post
Every "drain" will or could be different until you develop a procedure and follow it specifically. Your 6" of lift is going to effect yours I'd think for sure. How much? Don't know. Let it drain for a couple hours. Was it full when you "sticked it cold"? Did you stick it cold? If you haven't if the car is on all fours and "cold" with "no starts' stick it and see where you are before you start.

So what would you recommend? I need about an extra 1" of clearance to get pan under. Would like to avoid using jacks as I'm not sure where I can safely put the jack to avoid damage to the car. The 92 "Z" is different than my 90 vert. Also, I know there's been a running debate about the best way to jack a C4 with no consensus. Thought maybe I could drive it up on two stacked boards (would give me 1.5"). Sure seems like the ramps would be easiest and safest for all concerned. Opinion?
RedrockLT5 is offline   Reply With Quote
Old 06-09-2013   #5
Hammer
 
Hammer's Avatar
 
Join Date: Apr 2006
Location: Ideho
Posts: 2,653
Talking Re: ZR-1 newbie oil change question

Quote:
Originally Posted by RedrockLT5 View Post
So what would you recommend? I need about an extra 1" of clearance to get pan under. Would like to avoid using jacks as I'm not sure where I can safely put the jack to avoid damage to the car. The 92 "Z" is different than my 90 vert. Also, I know there's been a running debate about the best way to jack a C4 with no consensus. Thought maybe I could drive it up on two stacked boards (would give me 1.5"). Sure seems like the ramps would be easiest and safest for all concerned. Opinion?
http://www.zr1netregistry.com/Inform...up-a-ZR-1.aspx
__________________
[I][FONT=Comic Sans MS]John Boyd[/FONT][/I]
[I][FONT=Comic Sans MS][SIZE=1]Ideho[/SIZE][/FONT][/I]
[FONT=Comic Sans MS][SIZE=1][I]2015 ZL1 [/I][I]Camaro #1121 BLACK/BLACK 6 SPD (540 RWHP)[/I][/SIZE][/FONT]
[I][FONT=Comic Sans MS][SIZE=1]1991 ZR-1 #458 [COLOR=red]RED/[/COLOR][COLOR=black]BLACK 72[/COLOR]k miles ([B][COLOR=red]SOLD[/COLOR][/B])
1991 ZR-1 #473 [COLOR=red]RED/[/COLOR][COLOR=black]BLACK [/COLOR]37k miles ([B][COLOR=red]SOLD[/COLOR][/B])[/SIZE][/FONT][/I]
Hammer is offline   Reply With Quote
Old 06-09-2013   #6
gbrtng
 
gbrtng's Avatar
 
Join Date: Feb 2006
Location: San Antonio area
Posts: 1,179
Default Re: ZR-1 newbie oil change question

90 and 92 frames are the same - jack on the sides at the arrows or front middle on the cross member. I like to have the vehicle level to get a complete drain.
__________________
“Buy the best example of what you want, and pay whatever it takes. That way, you cry only once.” ~ Bruce Meyer
gbrtng is offline   Reply With Quote
Old 06-09-2013   #7
Dynomite
 
Dynomite's Avatar
 
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,797
Default Re: ZR-1 newbie oil change question

Quote:
Originally Posted by RedrockLT5 View Post
Just got my 92 red/red and just love it! Previous owner said oil was changed last fall and with almost no miles on the new oil but think I'll change it just so I know for sure when done last. My question: Need to lift the car a few inches to get oil pan under car so I thought I'd drive it up on my ramps (6 inches of lift), and allow the oil to drain over several hours. WIll this mess up the amount of oil drained and that needs to be replace? I believe it's 8.5 quarts with filter right?

Sorry about the trivial question but I want to do this right.

Thanks for your help
Perfect....I do exactly as you do when changing oil.......the little oil you might miss this time you will get next time and you will definitely leave some oil in the engine when you drain...NO PROBLEM

Let it sit over night (or a couple hours) before you remove the oil filter to make sure the oil filter has drained back. Just add 8-9 quarts of oil. The best time to check oil is one pull of the dipstick after it has sat for several hours. Take the first reading as just removing/replacing the dipstick leaves oil in the dipstick tube which messes up readings after the first.

I use AMSOIL 10W 40 Synthetic LT5/ZR-1 Fluids


Last edited by Dynomite; 06-09-2013 at 09:17 PM.
Dynomite is offline   Reply With Quote
Old 06-09-2013   #8
DaveK
 
Join Date: Jul 2004
Location: Sudbury, Ontario. Canada
Posts: 1,538
Default Re: ZR-1 newbie oil change question

I have some small raceramps that I use for this for the same reason. I leave it overnight but you can probably get away with a few hours if you need to turn the car around quicker. As everyone says, it's hard to get all the oil out of the LT5 but the small amount left isn't really a problem.

Dave
__________________
1991 #1516 Black/Black

davidmkelly.com

"Speed is often confused with insight." - Johan Cruijff
DaveK is offline   Reply With Quote
Old 06-09-2013   #9
RedrockLT5
 
Join Date: May 2013
Location: Hillsborough, New Jersey
Posts: 11
Default Re: ZR-1 newbie oil change question

Thank you all for your replies and the helpful hints!!!
RedrockLT5 is offline   Reply With Quote
Old 06-09-2013   #10
PhillipsLT5
 
PhillipsLT5's Avatar
 
Join Date: Aug 2005
Location: Scottsdale, AZ
Posts: 2,452
Default Re: ZR-1 newbie oil change question

try this
http://www.mityvac.com/pages/products_fee.asp
try 7201
PhillipsLT5 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:45 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020