|
04-05-2013
|
#1 |
 Join Date: Oct 2010
Location: Rock Hill, SC
Posts: 160
|
Weld RT-S Wheel, I bought them.
About 2 months ago I asked the question on Weld RT-S Wheels, well nobody had them. Okay I bought them. They look great, are made great Forged) and fit great. Right now I have stock brakes on but that is going to be short lived. I got the medium pad so bigger brakes will be no problem. The only problem I had was that the Weld techs tried to tell me that their offsets they had listed was right but as we on the thread discussed they were wrong. I went with the stock offset 33 and 52 and you can't tell the difference.
I did choose to go with the polished as opposed to the black spokes because I was worried if the black got scratched I would have to get the whole wheel refinished. The other difference is price. $2000 for all 4 and the billet centers and lugs. Plus they were made in the US. 
__________________
'93 #166 Black Rose “Out of every one hundred men, ten shouldn't even be there, eighty are just targets, nine are the real fighters, and we are lucky to have them, for they make the battle. Ah, but the one, one is a warrior, and he will bring the others back.” Heraclitus |
|
|
|
04-05-2013
|
#2 |
 
Join Date: Jun 2004
Location: Texas
Posts: 2,431
|
Re: Weld RT-S Wheel, I bought them.
Very nice wheels. Great choice and looks great on the car. Set of drilled rotors will look fantastic.
__________________
95 ZR-1 BLK/Gry #392 LT5 Reg# 868 *RIP* ZR1NET Founding Mem #155 |
|
|
|
|
04-05-2013
|
#3 |
|
Join Date: Oct 2010
Location: Rock Hill, SC
Posts: 160
|
Re: Weld RT-S Wheel, I bought them.
They are warranted to be "true" radial and lateral run-out. They come with a 3 year Structural Warranty. So I feel pretty safe with them and I know their racing history.
__________________
'93 #166 Black Rose “Out of every one hundred men, ten shouldn't even be there, eighty are just targets, nine are the real fighters, and we are lucky to have them, for they make the battle. Ah, but the one, one is a warrior, and he will bring the others back.” Heraclitus Last edited by MikeGolf; 04-05-2013 at 11:28 PM. |
|
|
|
|
04-05-2013
|
#4 |
|
Join Date: Oct 2010
Location: Rock Hill, SC
Posts: 160
|
Re: Weld RT-S Wheel, I bought them.
Cater, I'll be getting with you about making a set of ZR-1 center caps, lol! Need that bling, enjoying your ZR-1 emblems.
__________________
'93 #166 Black Rose “Out of every one hundred men, ten shouldn't even be there, eighty are just targets, nine are the real fighters, and we are lucky to have them, for they make the battle. Ah, but the one, one is a warrior, and he will bring the others back.” Heraclitus |
|
|
|
|
04-05-2013
|
#5 |
|
Join Date: Jun 2004
Location: Texas
Posts: 2,431
|
Re: Weld RT-S Wheel, I bought them.
Mike,
I appreciate the kudo. When you are ready for me to machine some caps just give me a holler. The emblems look great but you only got a bit of the one in the pic. Hope all is well. I'm doing taxes so life is not good right now ;-( Later, Carter 
__________________
95 ZR-1 BLK/Gry #392 LT5 Reg# 868 *RIP* ZR1NET Founding Mem #155 |
|
|
|
|
04-06-2013
|
#6 |
|
Join Date: Dec 2012
Location: NC
Posts: 1,786
|
Re: Weld RT-S Wheel, I bought them.
They favor Calloway wheels.
__________________
I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads... ( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b] Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc... 1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3" [IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG] |
|
|
|
|
04-06-2013
|
#7 |
 
Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,904
|
Re: Weld RT-S Wheel, I bought them.
Jeff, great looking car and wheels!
__________________
1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project |
|
|
|
|
04-06-2013
|
#8 |
Join Date: Jan 2012
Location: Wisconsin
Posts: 887
|
Re: Weld RT-S Wheel, I bought them.
Those look awesome. I like that deep dish.
Good choice! |
|
|
|
|
04-06-2013
|
#9 |
|
Join Date: Oct 2010
Location: Rock Hill, SC
Posts: 160
|
Re: Weld RT-S Wheel, I bought them.
Thanks
__________________
'93 #166 Black Rose “Out of every one hundred men, ten shouldn't even be there, eighty are just targets, nine are the real fighters, and we are lucky to have them, for they make the battle. Ah, but the one, one is a warrior, and he will bring the others back.” Heraclitus |
|
|
|
|
04-06-2013
|
#10 |
Join Date: Mar 2004
Location: Found Member
Posts: 4,346
|
Re: Weld RT-S Wheel, I bought them.
Those wheel's look great Jeff, they look as good as the very expensive Fikse's. Change out those center cap's for a set of CM flat button's.
__________________
Frank Urbo. NCM Lifetime member # 982 Registry Founding # 237 |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
