|
03-24-2013
|
#1 |
|
Join Date: Mar 2013
Location: chocowinity, nc
Posts: 7
|
Relays Needed
Have just purchased a 1994 ZR1 and am wondering about the relays I ought to have "on hand". Also have the factory manuals and they are not helpful when I tried to find the location of relays on the car. (Unless I'm looking in the wrong sections) Have just gotten out of the muscle car era (69 Plymouth GTX ) which had no advanced electrical components at all. So I need help on electrical spare parts and their location. Thanks in advance.
|
|
|
|
03-24-2013
|
#2 | |
  
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,797
|
Do not stock up on items that rarely fail
Quote:
I am not so sure you need any spare electrical parts except bulbs for lights unless you have LED  A lot of the electrical issues can be traced to bad or deteriorating ground connections. Or in my case missing a ground connection when installing an LT5 in the ZR-1 Make Sure ALL Grounds Are Connected 
__________________
Left Clickable links  -Solutions- LT5 Modifications/Rebuild Tricks Low Mileage ZR-1 Restoration 1990 Corvette (L98) Modifications LT5 Eliminated Systems LT5 Added Systems LT5/ZR-1 Fluids 1995 LT5 SPECIFIC TOP END REBUILD TRICKS Last edited by Dynomite; 03-25-2013 at 11:09 AM. |
|
|
|
|
|
03-24-2013
|
#3 | |
 
Join Date: Jan 2009
Location: Portland Oregon metro area (Washington side)
Posts: 3,207
|
Re: Relays Needed
Quote:
__________________
Scott  Vett owner since 1979._It's about the car and the people |
|
|
|
|
|
03-25-2013
|
#4 | |
   
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: Relays Needed
Quote:
What relays?
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
|
03-25-2013
|
#5 |
|
Join Date: Mar 2013
Location: chocowinity, nc
Posts: 7
|
Re: Relays Needed
I guess I wasn't clear. Was wondering what relays there are that have some history of failure, that can shut you down from getting home, and could be carried with you for getting you back home. I have heard some references to the fuel pump relay and the starter relay in these cars. Or am I off base? Thanks.
|
|
|
|
|
03-25-2013
|
#6 | |
|
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,797
|
Re: Relays Needed
Quote:
 see Do not stock up on items that rarely fail I have heard of guys/gals taking spare starters with them for example....which is an example of getting carried away. I would have some tools including an ohm meter in storage area (passenger storage area under insert is a large area for tools).
__________________
Left Clickable links -Solutions- LT5 Modifications/Rebuild Tricks Low Mileage ZR-1 Restoration 1990 Corvette (L98) Modifications LT5 Eliminated Systems LT5 Added Systems LT5/ZR-1 Fluids 1995 LT5 SPECIFIC TOP END REBUILD TRICKS Last edited by Dynomite; 03-25-2013 at 04:12 PM. |
|
|
|
|
|
03-25-2013
|
#7 | |
|
Join Date: Jan 2009
Location: Portland Oregon metro area (Washington side)
Posts: 3,207
|
Re: Relays Needed
Quote:
Here is what I keep "on hand". 1. ECM w/stock chip (to get through DEQ) 2. oil filters (5 or so) 3. spare air filter 4. set of plugs 5. GM hydrolic clutch fluid 6. ZF6 tranny fluid (GM can't get it any more) 7. Spare set of tires and wheels. For ideas on service and repair I go to: http://www.zr1netregistry.com/ and look under "INFORMATION"
__________________
Scott Vett owner since 1979._It's about the car and the people Last edited by scottfab; 03-25-2013 at 01:36 PM. |
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
