|
09-07-2012
|
#1 |
 Join Date: Aug 2012
Location: Rockwall, TX
Posts: 27
|
A/C help
Left Dallas this evening with the wife for a road trip (to a car show in far western Oklahoma) in the Z and made it about a mile from the house before my ac compressor went up in smoke. Everything seems to be ok as long as the clutch doesnt kick in, so We decided to press on to the car show sans ac, but it was pretty brutal until the sun went down. We made it to Oklahoma city for the night, so I wanted to post and see if anyone knew about parts availability. The smoke looked like it was coming from the clutch, so I presume I'll need a compressor, clutch and dryer at a minimum.
|
|
|
|
09-07-2012
|
#2 |
 
Join Date: Dec 2004
Location: Jacksonville, FL USA
Posts: 4,645
|
Re: A/C help
I bought a remaned compressor w/ the clutch & pulley off of e-bay. It was less that $300.00. They even asked which gas I had in the system before they sold me the parts. I'll go thru my bills to see if I can post the name of the company if you like? I think they were based in TX.
 Tom
__________________
1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member |
|
|
|
|
09-07-2012
|
#3 |
   
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: A/C help
Just go with a reman unit like tom suggests off of eBay a dryer is also advisable.
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V Last edited by GOLDCYLON; 09-07-2012 at 10:04 AM. |
|
|
|
|
09-07-2012
|
#4 | |
|
Join Date: Aug 2012
Location: Rockwall, TX
Posts: 27
|
Re: A/C help
Quote:
|
|
|
|
|
|
09-07-2012
|
#5 |
 
Join Date: Jan 2009
Location: Portland Oregon metro area (Washington side)
Posts: 3,207
|
Re: A/C help
Do not just replace the dryer and compressor.
Replace the "orifice" also. All you have to do is just take it out and look at it and you'll see why. Also if you're not already using R134a it a perfect time to switch. R12 is disappearing. It is illegal to manufacture. You may still find some from old stock but... when its gone it's gone and as stockpiles recede $ goes up.
__________________
Scott  Vett owner since 1979._It's about the car and the people |
|
|
|
|
09-07-2012
|
#6 |
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
|
Re: A/C help
OUr ZR-1s use the nippondenso 10PA17 Compressor. The regular Corvettes L98/LT1/4 use the Nippondenso 10PA20 which is a larger compressor. Keep this in mind where ever you buy one. Here are 2 I found on eBay:
Also the first one says Denso (which is the SAME company just a shortened from nippondenso) http://www.ebay.com/itm/1990-1995-CH...7607e3&vxp=mtr http://www.ebay.com/itm/New-OEM-A-C-...1779dc&vxp=mtr
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
