Oil seperator for the pvc system

[2lpzr1s]

Has anyone come up with a workable oil seperator for the pvc tract after the valves. What parts did ya use where did ya get them? Loco bobs cool engine looks like he has them.

[tf95ZR1]

Try


http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWN%3AIT

for a start. Can't vouch for them, but its an idea.......

[ZR1 MK]

Originally Posted by 2lpzr1s

Has anyone come up with a workable oil seperator for the pvc tract after the valves. What parts did ya use where did ya get them? Loco bobs cool engine looks like he has them.

A small tank and hose will do it. Nothing special needed.

[2lpzr1s]

Thanx for the idea. Where have those of you that have done this mount the tank. also how often does it need to be drained. thanx

[Locobob]

My catch can began life as a stainless steel bathroom soap dispenser, welded two bungs on top for the in and out lines and one on the bottom for a drain ****. I chose the can because of its size - it fits nicely just forward of the master cylinder along the inner fender. I fabbed up a bracket to mount it to the existing inner fender bolts. I drained it after driving about 1K miles and got a little under 1 cup of oil out of it. I would have rather just bought an existing product but all of them that I found were to big to fit where I wanted to put it. The larger cans can be easily mounted in the well in front of the tire but you'll have to route more hose to get it there and then back to the plenum.

[UKZR1]

Originally Posted by tf95ZR1

Try


http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWN%3AIT

for a start. Can't vouch for them, but its an idea.......

I bought a very similarlooking product from ebay.co.uk a while back. Looks to be good quality and well finished. I havent installed it yet as my engines out being worked on. At the price you can't really go wrong. I would probably get some better hose as the stuff supplied is a bit cheap looking