|
06-18-2012
|
#1 |
  
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,797
|
Bling
Just have ta show some of our In-House Talent........(Carter and Lee)
Carter200 Bling  All Aluminum Caps are machined with very close tolerance and fit perfectly over existing caps. All Aluminum caps are engraved as follows and as shown for the Brake Fluid Aluminum Caps. 1. POWER STEERING FLUID (Steering Wheel Etched) 2. RADIATOR 15 PSI CAP   3. WASHER FLUID ONLY (Wipers Etched) 4. ENGINE COOLANT OVERFLOW   5. BRAKE FLUID DOT 4 ONLY 
__________________
Left Clickable links  -Solutions- LT5 Modifications/Rebuild Tricks Low Mileage ZR-1 Restoration 1990 Corvette (L98) Modifications LT5 Eliminated Systems LT5 Added Systems LT5/ZR-1 Fluids 1995 LT5 SPECIFIC TOP END REBUILD TRICKS Last edited by Dynomite; 07-27-2012 at 01:13 AM. |
|
|
|
06-18-2012
|
#2 |
   
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: Bling
I see lots o Bling
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
06-18-2012
|
#3 |
|
Banned
BANNED
Join Date: Oct 2006
Location: MD
Posts: 3,690
|
Re: Bling
Wow Now that's alot of blingo!!!!!!!!!!!!111
Sweet!!!!!  David |
|
|
|
|
06-20-2012
|
#4 |
 
Join Date: Dec 2004
Location: Jacksonville, FL USA
Posts: 4,645
|
Re: Bling
  Yo Cliff, that looks cool!Tom
__________________
1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member |
|
|
|
|
06-20-2012
|
#5 | |
 
Join Date: Jan 2009
Location: Portland Oregon metro area (Washington side)
Posts: 3,207
|
Re: Bling
I'm really liking that breather box.
You're neglecting the oil filter. It needs a cover in stainless or aluminum. All it would need is a flat spring inside to hold it on. Scott   Owner since 1997Quote:
__________________
Scott  Vett owner since 1979._It's about the car and the people |
|
|
|
|
|
06-20-2012
|
#6 | |
Join Date: Jun 2004
Location: Texas
Posts: 2,431
|
Re: Bling
Quote:
PS: No flat spring required
__________________
95 ZR-1 BLK/Gry #392 LT5 Reg# 868 *RIP* ZR1NET Founding Mem #155 |
|
|
|
|
|
06-20-2012
|
#7 |
|
Join Date: Sep 2010
Location: Sterling, VA
Posts: 147
|
Re: Bling
Hi All:
Great Thread! Any sources on replacement aluminum tanks for the various plastic tanks underhood?
__________________
Thanks ... Paul (Paul in VA) WAZOO Member |
|
|
|
|
06-21-2012
|
#8 |
|
Join Date: Dec 2005
Location: Tinton Falls, NJ
Posts: 1,177
|
Re: Bling
I also sport Carter hardware but I pc'd them black and colored in the writing with a silver/red combo. My Coplon is also painted black. Always get big compliments directed at Carters work.
|
|
|
|
|
06-21-2012
|
#9 |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,707
|
Re: Bling
Dyno,
I would think the BKR 5s are a bit too hot. I run the 6s. Maybe Iridium is different, but it would be interesting to look at the ground strap on those plugs.
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX |
|
|
|
|
06-21-2012
|
#10 | |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,707
|
Re: Spark Plugs
What does the ground strap look like? That determines heat range. BTW, I don't use anti-seize anymore. Always found plugs would loosen up. I just apply a film of oil on threads now.
Quote:
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX |
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
