Clutch Release Bearing Note! - ZR-1 Net Registry Forums

limey · 05-13-2012

Man my ears are burning today!

For anyone that ordered a release bearing from us over the past 8 weeks and is for an early car 90-92 and early 93, make note that the inner plastic sleeve has to be removed BEFORE trying to install the transmission.

A little unknown fact is that GM used the same bearing for all 89-96 ZF cars, but that very same bearing in mid 1993 had a plastic sleeve inserted to reduce noise. This plastic/nylon sleeve needs to be pushed out with a flat blade screwdriver BEFORE attempting install.

I had mentioned this reference in the listing when we advertised the bearings, but didn't ref. it during shipment. I understood that anyone that ordered from us already read the post, but sadly this appears to be the case.

I'm sending the customer a samco PCV Hose kit @ NC for the trouble, along with my appology.

tomtom72 · 05-14-2012

You da man, Kurt! Way to step up.

Tom

05-13-2012	#1
limey Join Date: Oct 2008 Location: tampa Posts: 538	Clutch Release Bearing Note! Man my ears are burning today! For anyone that ordered a release bearing from us over the past 8 weeks and is for an early car 90-92 and early 93, make note that the inner plastic sleeve has to be removed BEFORE trying to install the transmission. A little unknown fact is that GM used the same bearing for all 89-96 ZF cars, but that very same bearing in mid 1993 had a plastic sleeve inserted to reduce noise. This plastic/nylon sleeve needs to be pushed out with a flat blade screwdriver BEFORE attempting install. I had mentioned this reference in the listing when we advertised the bearings, but didn't ref. it during shipment. I understood that anyone that ordered from us already read the post, but sadly this appears to be the case. I'm sending the customer a samco PCV Hose kit @ NC for the trouble, along with my appology. __________________ [SIZE=3][B][COLOR=Red]Worlds largest ZR-1 LT5 Parts Store[/COLOR][/B][/SIZE] [URL="http://whiteracingproducts.com/"]http://whiteracingproducts.com[/URL] New & Used Parts, as well as free Locator services. [EMAIL="sales@whiteracingproducts.com"]sales@whiteracingproducts.com[/EMAIL] (813) 264-6368

05-14-2012	#2
tomtom72 Join Date: Dec 2004 Location: Jacksonville, FL USA Posts: 4,645	Re: Clutch Release Bearing Note! You da man, Kurt! Way to step up. Tom __________________ 1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode