|
08-07-2011
|
#1 |
Join Date: Dec 2007
Location: Fremont,Ca
Posts: 3,079
|
A question about oil pan bolts.
I noticed my fisrt oil spot on the garage floor and took a look at the oil pan,you can almost see it through all the oil caked on the sides.
 .So my question is can I just torque down the bolts or is the gasket shot once oil has seeped past the seal.I know what Ill be doing next weekend,better stock up on alot of rags and degreaser.I think Ill try an orange based degreaser if I can find one.
|
|
|
|
08-07-2011
|
#2 |
  
Join Date: Jun 2005
Location: pittsburgh
Posts: 4,632
|
Re: A question about oil pan bolts.
you can just retighten the bolts
__________________
It's not the car, it's the people - Doug Johnson 90 r/r "KEYS ON" nick named "T.L.B" |
|
|
|
|
08-07-2011
|
#3 |
Join Date: Oct 2004
Location: Folsom CA
Posts: 1,655
|
Re: A question about oil pan bolts.
The front bolts are nearly impossible to get at to tighten up unless you remove the "K" brackets.
There's one on each side and although they look like they are attached to the engine mount they are not. The engine will not drop out if you remove them. Maybe. At least mine didn't. I think.  TomC 'Crabs
__________________
TomC '90ZR1 #792 Honorary Pirate [B]If it ain't FUN, you're doing something terribly WRONG. [/B] |
|
|
|
|
08-07-2011
|
#4 | |
|
Join Date: Jul 2009
Location: Redding Calif
Posts: 223
|
Re: A question about oil pan bolts.
Quote:
Now that's reassuring. 
__________________
1994 ZR-1 # 0102...SOLD |
|
|
|
|
|
08-07-2011
|
#5 |
|
Join Date: Oct 2004
Location: Folsom CA
Posts: 1,655
|
Re: A question about oil pan bolts.
Just having a little fun.
TomC 'Crabs
__________________
TomC '90ZR1 #792 Honorary Pirate [B]If it ain't FUN, you're doing something terribly WRONG. [/B] |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
