Loctite 262 - ZR-1 Net Registry Forums

LGAFF · 06-12-2011

Can't find it can I use 271, where it calls for 262 or will that be too strong?

A26B · 06-12-2011

See if you can find Loctite 263. It's the same strength as 262, except that it already has primer.

I'm in the process of becoming approved as a jobber for Loctite and will be listing 242/3 & 262/3 on the website. A couple of the guys at BG told me it was a pain to find and run around to get it.....suggested that i keep it in stock as a convenience item.

LGAFF · 06-12-2011

No luck on 263, will check with my machinist on Monday

lbszr · 06-12-2011

Quote:

Originally Posted by LGAFF

No luck on 263, will check with my machinist on Monday

This is the company I purchased some a few years ago.

http://applied.findlocation.com/results.aspx

lbszr · 06-12-2011

They might not have 262 anymore, but here's the 263 that A26 mentions.

http://www.applied.com/apps/commerce/catalog/catalog.do

Jagdpanzer · 06-12-2011

I get 262 at my local Fastenal store

http://www.fastenal.com/web/products...u=62404&ucst=t

bdw18_123 · 06-12-2011

I got my 262, 242, 565 & 518 (substitute for Permabond A136) from a couple of companies selling through Amazon.

RICHARD TILL · 06-13-2011

I`ve got two nearly full bottles. 1.69 fl. oz. They use it on each little job where i work and leave the remainder of the bottle to be thrown away. Thats when i come into the picture. If you don`t have any luck finding any, let me know and i`ll mail you one of em.

LGAFF · 06-13-2011

Thanks for the offer; got the last bottle at Fastenal store

Thanks Phil!

HAWAIIZR-1 · 06-14-2011

I see you have it resolved, but for what it is worth, here is the answer I received when I had a problem finding 262 in Hawaii. This is from Loctite Tech USA Industrial Dept:

Craig,

Loctite 262 is approximately 40% less strength in both breakaway and prevailing strength than Loctite 271 on steel fasteners. The fixture time is a little longer with Loctite 271 vs 262, 10 minutes and 5 minutes respectively. The viscosity is lower with Loctite 271 than 262, 500 cps vs 1850cps. Other than that the temperature , gap filling and sizes of fasteners are about the same. Hope this has helped you.

Take Care,

Tom Kosloski

06-12-2011	#1
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,194	Loctite 262 Can't find it can I use 271, where it calls for 262 or will that be too strong? __________________ LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359

06-12-2011	#2
A26B Join Date: Dec 2003 Location: Arcadia,OK Posts: 3,394	Re: Loctite 262 See if you can find Loctite 263. It's the same strength as 262, except that it already has primer. I'm in the process of becoming approved as a jobber for Loctite and will be listing 242/3 & 262/3 on the website. A couple of the guys at BG told me it was a pain to find and run around to get it.....suggested that i keep it in stock as a convenience item. __________________ Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 *ZR-1*, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed.

06-12-2011	#3
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,194	Re: Loctite 262 No luck on 263, will check with my machinist on Monday __________________ LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359

06-12-2011	#5
lbszr Join Date: Nov 2006 Location: dayton,ohio Posts: 425	Re: Loctite 262 They might not have 262 anymore, but here's the 263 that A26 mentions. http://www.applied.com/apps/commerce/catalog/catalog.do __________________ [FONT=Comic Sans MS][COLOR=red]"I wanna go fast!!"[/COLOR][/FONT] [FONT=Comic Sans MS][COLOR=#ff0000]-- Ricky Bobby[/COLOR][/FONT]

06-12-2011	#6
Jagdpanzer Join Date: Apr 2007 Location: Northern VA Posts: 2,661	Re: Loctite 262 I get 262 at my local Fastenal store http://www.fastenal.com/web/products...u=62404&ucst=t __________________ Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake

06-12-2011	#7
bdw18_123 Join Date: Apr 2009 Location: Prather, CA Posts: 809	Re: Loctite 262 I got my 262, 242, 565 & 518 (substitute for Permabond A136) from a couple of companies selling through Amazon. __________________ [IMG]http://i13.photobucket.com/albums/a292/bdw18_123/_zr1netforumsigphoto.jpg[/IMG][B] 1990 Corvette ZR-1 [/B][I] White/Flame Red, #2299, mostly stock, 144K miles.[/I] -Cams timed to the '93-'95 405HP LT5 stock timing. -IAT sensor relocated to below front bumper. -Haibeck hoops installed in airduct. -OBX cat-back exhaust. [COLOR=DarkRed][B](SOLD - December 2012 [/B][/COLOR][COLOR=DarkRed][B]:hello:)[/B][/COLOR] 1993 Corvette Coupe Black/Black, 6-speed (SOLD - October 2009 :hello:)

06-13-2011	#8
RICHARD TILL Join Date: Aug 2005 Location: Iuka, Mississippi 38852 Posts: 756	Re: Loctite 262 I`ve got two nearly full bottles. 1.69 fl. oz. They use it on each little job where i work and leave the remainder of the bottle to be thrown away. Thats when i come into the picture. If you don`t have any luck finding any, let me know and i`ll mail you one of em.

06-13-2011	#9
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,194	Re: Loctite 262 Thanks for the offer; got the last bottle at Fastenal store Thanks Phil! __________________ LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359

06-14-2011	#10
HAWAIIZR-1 Join Date: May 2010 Location: Japan Posts: 3,588	Re: Loctite 262 I see you have it resolved, but for what it is worth, here is the answer I received when I had a problem finding 262 in Hawaii. This is from Loctite Tech USA Industrial Dept: Craig, Loctite 262 is approximately 40% less strength in both breakaway and prevailing strength than Loctite 271 on steel fasteners. The fixture time is a little longer with Loctite 271 vs 262, 10 minutes and 5 minutes respectively. The viscosity is lower with Loctite 271 than 262, 500 cps vs 1850cps. Other than that the temperature , gap filling and sizes of fasteners are about the same. Hope this has helped you. Take Care, Tom Kosloski __________________ Craig "ZR-1 NO KA 'OI" "ZR-1 ICHIBAN" 1995 #228 Black/Black with Dunn Heads ZR-1 owner since September 2003 ZR-1 Net Registry Founding Member #0074 NCM Lifetime Member #2048

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode