Help, my new Z stumbled on the highway. - ZR-1 Net Registry Forums

NewZpilot · 02-03-2006

Ok Im new to having a zr (6 days) and had an issue, heard you guys are the ones to ask

. Cars been great until on the highway in full power I stand in it in 3rd at 50-60 miles and hour and it studders then creapping allong on the highway it does the same thing while the service light comes on??After limping it back to work 2 miles it cleared up and was back to running smooth and after parking it for a few hours when I headed home the service light was gone? NO volt issues, no heat issues, no oil pressure issues, Just not sure what to start with

?

02-03-2006

The best diagnostic tool to have is a paper clip.

Unbend the paperclip so it is in a "U" shape. Plug it into the ALDL ports (port in the drivers side footwell) A-B. This will hit the ecm codes which will be stored. trun the key to "run"

Count the pulses.

flash.... flash flash is a code 12 which means it is entering the system. Anything after that is a code(s) which will help troubleshoot.

My best guess is your secondary system is at fault, hence the stumble at WOT.

Kevin · 02-04-2006

I'm going with secondary leak

RICKYRJ1 · 02-04-2006

Sounds like the car is shot!! Call me if you want to get rid of it cheap!

NewZpilot · 02-04-2006

Yeah I should prob. hook it. WHos in for a 6pack and some nuddy mags for my z? What ever ill push this car to the corvette show just to look cool before I hook it. My wifes already jealous of her and Ive only had it a week. Its good to know If I needed out I can always count on you.

Aurora40 · 02-04-2006

The paperclip thing Jeff said will take you 30 seconds. You'll know a lot more from those two digits of the troublecode.

What does "hook it" mean?

RICKYRJ1 · 02-04-2006

Quote:

Originally Posted by NewZpilot

Yeah I should prob. hook it. WHos in for a 6pack and some nuddy mags for my z? What ever ill push this car to the corvette show just to look cool before I hook it. My wifes already jealous of her and Ive only had it a week. Its good to know If I needed out I can always count on you.

How did you know I wanted to pay you in porn? Good Luck with the fix. I agree pushing or pulling your Z will still look better than anything else.

Corvette95 · 02-04-2006

NewZpilot, I know this is "off topic" but can you check the front fog light area of your see and tell me if the black area around your fog lights has any white overspray paint on it like mine?
http://temp.corvetteforum.net/c5/cor...ight_front.jpg

NewZpilot · 02-06-2006

Ok no paint overspray and found out at GM sat may car pulled a code 31 or a cam sensor. Since the light went out they claim wait till it fails and then fix it????

BBBAD94ZR1 · 03-14-2006

My car did the say exact thing, took it to the dealer and had the injectors flushed while the fuel was cut off. Put on a new fuel filter, new plugs gapped .50 and the car runs like a top.=D>
Ray

02-03-2006	#1
NewZpilot Join Date: Feb 2006 Location: Kansas City Posts: 7	Help, my new Z stumbled on the highway. Ok Im new to having a zr (6 days) and had an issue, heard you guys are the ones to ask . Cars been great until on the highway in full power I stand in it in 3rd at 50-60 miles and hour and it studders then creapping allong on the highway it does the same thing while the service light comes on??After limping it back to work 2 miles it cleared up and was back to running smooth and after parking it for a few hours when I headed home the service light was gone? NO volt issues, no heat issues, no oil pressure issues, Just not sure what to start with ?

02-03-2006	#2
Jeffvette Guest Posts: n/a	Re: Help, my new Z stumbled on the highway. The best diagnostic tool to have is a paper clip. Unbend the paperclip so it is in a "U" shape. Plug it into the ALDL ports (port in the drivers side footwell) A-B. This will hit the ecm codes which will be stored. trun the key to "run" Count the pulses. flash.... flash flash is a code 12 which means it is entering the system. Anything after that is a code(s) which will help troubleshoot. My best guess is your secondary system is at fault, hence the stumble at WOT.

02-04-2006	#3
Kevin Join Date: Jun 2005 Location: pittsburgh Posts: 4,632	Re: Help, my new Z stumbled on the highway. I'm going with secondary leak __________________ It's not the car, it's the people - Doug Johnson 90 r/r "KEYS ON" nick named "T.L.B"

02-04-2006	#4
RICKYRJ1 Join Date: Dec 2005 Location: Tinton Falls, NJ Posts: 1,177	Re: Help, my new Z stumbled on the highway. Sounds like the car is shot!! Call me if you want to get rid of it cheap!

02-04-2006	#5
NewZpilot Join Date: Feb 2006 Location: Kansas City Posts: 7	Re: Help, my new Z stumbled on the highway. Yeah I should prob. hook it. WHos in for a 6pack and some nuddy mags for my z? What ever ill push this car to the corvette show just to look cool before I hook it. My wifes already jealous of her and Ive only had it a week. Its good to know If I needed out I can always count on you.

02-04-2006	#6
Aurora40 Join Date: May 2005 Location: Leesburg, VA Posts: 2,713	Re: Help, my new Z stumbled on the highway. The paperclip thing Jeff said will take you 30 seconds. You'll know a lot more from those two digits of the troublecode. What does "hook it" mean? __________________ Bob Saveland Former owner of #2517 [IMG]http://a.random-image.net/aurora40/vette.jpg[/img]

02-04-2006	#8
Corvette95 Join Date: Jan 2006 Location: Decatur, AL Posts: 1,119	Re: Help, my new Z stumbled on the highway. NewZpilot, I know this is "off topic" but can you check the front fog light area of your see and tell me if the black area around your fog lights has any white overspray paint on it like mine? http://temp.corvetteforum.net/c5/cor...ight_front.jpg __________________ Corvette95 Registry and Forum (*************) 1989 C4 Conv Wht/Gry Auto Hardtop Top Flight SOLD 1995 C4 Coupe Purple/Blk 6 Speed 1989 C4 Conv Wht/Red Auto SOLD 1996 C4 Conv Black/Tan Auto SOLD 1994 C4 Coupe Wht/Blk SOLD 1995 C4 ZR-1 White/Gry #278 Dual Dunn Head SOLD 1986 C4 Coupe Black/Red 4+3 SOLD 1990 C4 ZR-1 Red/Red #0454

02-06-2006	#9
NewZpilot Join Date: Feb 2006 Location: Kansas City Posts: 7	Re: Help, my new Z stumbled on the highway. Ok no paint overspray and found out at GM sat may car pulled a code 31 or a cam sensor. Since the light went out they claim wait till it fails and then fix it????

03-14-2006	#10
BBBAD94ZR1 Join Date: Nov 2005 Location: NJ Posts: 299	Re: Help, my new Z stumbled on the highway. My car did the say exact thing, took it to the dealer and had the injectors flushed while the fuel was cut off. Put on a new fuel filter, new plugs gapped .50 and the car runs like a top.=D> Ray __________________ [FONT=Century Gothic][SIZE=5][COLOR=black][I]:dancing[/I][/COLOR][/SIZE][/FONT]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode