Header install this Saturday

[ZZZZZR1]

hey Wazoo,


Last minute install this saturday @ George Braml's home in Kingsville, MD (near White Marsh off 95).


Anyone interested I can PM them address and or directions.

We will start early (9am)


Looking forward to another Wazoo Maintenance day!





David

[ZR1@gmx.com]

Hey Dave, I would love to join you guys but the car is in the shop!
If you could shoot any photos and share some tips and tricks it will be greatly appreciated!
Thanks,
Kevin

[Scrrem]

David,
I am still putting mine back together but I could spare a few hours to lend a hand. Shoot me the address.
Rich

[secondchance]

David,

Like I said I will be on the road this Saturday - somewhere between Cleveland and DC.

Rich,
Don't forget to practice Dr. Phil's "teeth and string" trick. After your header install, WAZOO will not accept anything but 32 bolts in the holes.

One method I discussed with Jim is cut the tough to get to holes on the flange in such a way that these bolts, second row from the front, bottom, are screwed in first except for 3/8" or so. With the flange cut, headers can be slipped on followed by the remaining bolts screwed in. This may avoid 2 hours per bolt for these 2 bolts.

[ZZZZZR1]

Originally Posted by ZR1@gmx.com

Hey Dave, I would love to join you guys but the car is in the shop!
If you could shoot any photos and share some tips and tricks it will be greatly appreciated!
Thanks,
Kevin

Kevin

Absolutely!!!


David

[ZZZZZR1]

Originally Posted by Scrrem

David,
I am still putting mine back together but I could spare a few hours to lend a hand. Shoot me the address.
Rich

PM sent

[Scrrem]

Originally Posted by secondchance

Rich,
Don't forget to practice Dr. Phil's "teeth and string" trick. After your header install, WAZOO will not accept anything but 32 bolts in the holes.

One method I discussed with Jim is cut the tough to get to holes on the flange in such a way that these bolts, second row from the front, bottom, are screwed in first except for 3/8" or so. With the flange cut, headers can be slipped on followed by the remaining bolts screwed in. This may avoid 2 hours per bolt for these 2 bolts.

Yun,You know it. I will also bring along my custom fabricated 8 MM wrench for those tight places.I guess I was so busy running to the parts store, I missed all the fun you and Jim were having on the drivers side.Rich

[QB93Z]

I am sorry that I will not be able to attend. I will be at an antique show in Chantilly VA.

Good Luck George!

Jim

[LT5-1935]

Originally Posted by QB93Z

I am sorry that I will not be able to attend. I will be at an antique show in Chantilly VA.

Good Luck George!

Jim

Thanks Jim see ya at the next WMD

[ZZZZZR1]

New z owner is coming by to meet some Wazoo about 10am

Anyone else interested in coning by to help or just meet post up

Or PM me



David