|
02-24-2011
|
#1 |
|
Join Date: Jan 2011
Location: Mt Pleasant, SC
Posts: 9
|
Rear Spring Shims
My car was in an accident and lost several of the shims that go on either side of the rear spring, where it mounts to the diff. Could anyone provide me information on the specifics of those shims and where they go, abocve or below, relative to the spring? I know there are different colors that, evidently, represent different thicknesses. I'd appreciate anything, including sources of procurement, that might help me on this.
Thanks, Bill |
|
|
|
02-24-2011
|
#2 |
 
Join Date: Feb 2009
Location: Alexandria, Virginia
Posts: 1,467
|
Re: Rear Spring Shims
Bill,
When I get home this evening, I can go through my pics from last year. I think I still have some of my rear axle before I pulled it to get new gears. Rich
__________________
1990 Bright Red Coupe #608 380 Stroker, Ported Heads/Intake/Housings/TB Haibeck Secondary Delete Chip / Pete's Cams George Braml Intake / FIC Injectors Coated SW Headers / Corsa Bill Boudreau B/B ZF6 / Viper 4.10 gears Ron Davis Radiator Pioneer AVIC-Z140BH NAV Fikse FM5's 285 / 335 / C6 Brakes WAZOO Member |
|
|
|
|
02-24-2011
|
#3 |
|
Join Date: Mar 2009
Location: Orlando, FL
Posts: 1,828
|
Re: Rear Spring Shims
I've got a couple of spares sitting around. I think they are the 4 or 5 mm thickness.
|
|
|
|
|
02-24-2011
|
#4 |
|
Join Date: Feb 2009
Location: Alexandria, Virginia
Posts: 1,467
|
Re: Rear Spring Shims
Here's what mine looked like....
Rich
__________________
1990 Bright Red Coupe #608 380 Stroker, Ported Heads/Intake/Housings/TB Haibeck Secondary Delete Chip / Pete's Cams George Braml Intake / FIC Injectors Coated SW Headers / Corsa Bill Boudreau B/B ZF6 / Viper 4.10 gears Ron Davis Radiator Pioneer AVIC-Z140BH NAV Fikse FM5's 285 / 335 / C6 Brakes WAZOO Member |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
