Tips wanted: Rebushing front lower control arms/sway bar - ZR-1 Net Registry Forums

pantera1683 · 10-01-2010

I'm going to replace the bushings in the front lower control arms and the front sway bar to poly in my 94 and have a few questions.

1. How easy is it to remove the lower control arm?

2. Can I remove and replace the bushings in the lca and without a press?

3. Are there any special procedures or anything to pay attention to?

10-01-2010	#1
pantera1683 Join Date: Mar 2010 Location: Fort Worth, TX Posts: 396	Tips wanted: Rebushing front lower control arms/sway bar I'm going to replace the bushings in the front lower control arms and the front sway bar to poly in my 94 and have a few questions. 1. How easy is it to remove the lower control arm? 2. Can I remove and replace the bushings in the lca and without a press? 3. Are there any special procedures or anything to pay attention to?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode