Interior Door panel question - ZR-1 Net Registry Forums

USAFPILOT · 07-23-2010

My drivers door panel doesn't seem to want to hook or seat at the top of the panel. Ive tried twice now, but when the window goes up it pushes the door panel up and over the metal tabs. Even looking at the door panel, it doesn't seem like it ever had a way to grab onto those tabs anyway. It results in the door panel just barely vibrating against the dash, and it drives me insane. I'd prefer to have a rattle that is elusive rather than one I can see and stop by leaning against the door, yet cant find the proper fix.

Any ideas are appreciated.

GOLDCYLON · 07-24-2010

Is the backside of the panel ribbing cracked? That can cause a floppy door panel that does not want to hold on. Maybe bending back the top panel weatherstrip felt a bit might help on the catching (careful how you go as those little buggers are only pop riveted in). Do you have new window felt pads?

07-23-2010	#1
USAFPILOT Join Date: Aug 2007 Location: Spring TX Posts: 1,341	Interior Door panel question My drivers door panel doesn't seem to want to hook or seat at the top of the panel. Ive tried twice now, but when the window goes up it pushes the door panel up and over the metal tabs. Even looking at the door panel, it doesn't seem like it ever had a way to grab onto those tabs anyway. It results in the door panel just barely vibrating against the dash, and it drives me insane. I'd prefer to have a rattle that is elusive rather than one I can see and stop by leaning against the door, yet cant find the proper fix. Any ideas are appreciated.

07-24-2010	#2
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,123	Re: Interior Door panel question Is the backside of the panel ribbing cracked? That can cause a floppy door panel that does not want to hold on. Maybe bending back the top panel weatherstrip felt a bit might help on the catching (careful how you go as those little buggers are only pop riveted in). Do you have new window felt pads? __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode