|
06-11-2010
|
#1 |
 
Join Date: Jul 2005
Location: Las Vegas, Nevada
Posts: 777
|
Alternator bolt
Am looking for the mounting bolt for the upper alternator bracket. The bottom bolt near the oil filter. I believe it is 10mm. Also looking for the rubber protective cover for the wire connector (Nut) on the back of the alternator.
As always, thanks to you folks, and this net for being there when you need it!
__________________
JB 1990 #148 Red/Saddle Haibeck AYBKG5 Chip/RC Engineering/Flowmasters/K&N/Samco/Fuzzy Dice :cheers: |
|
|
|
06-11-2010
|
#2 |
 
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,394
|
Re: Alternator bolt
John,
if I recall correctly for the upper bracket, the lower bolt is M10 x 70 and the upper bolt is M10 x 50. I have both in new condition on the web site.
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
|
06-11-2010
|
#3 |
|
Join Date: Jul 2005
Location: Las Vegas, Nevada
Posts: 777
|
Re: Alternator bolt
Thanks Jerry! Are you back? Maybe I can get the two bolts shipped with my gasket order? I am ordering the bolts now.
__________________
JB 1990 #148 Red/Saddle Haibeck AYBKG5 Chip/RC Engineering/Flowmasters/K&N/Samco/Fuzzy Dice :cheers: |
|
|
|
|
06-11-2010
|
#4 |
|
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,394
|
Re: Alternator bolt
Nope, not yet! Still on the I-phone but sitting on the big bird. I'll ship the two orders together & refund the shipping on the bolt order.
Thanks John!
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
