ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 11-19-2009   #1
secondchance
 
Join Date: Aug 2006
Location: McLean, VA
Posts: 3,724
Default Bose Speakers

I was browsing through "the other" forum and stumbled on this thread on C4 Bose system.
Initial post is about disassembling speakers and coating the factory speaker cones w/ mixture of Elmer's wood glue/hot water.
It dawned on me these speakers are 14-20 years old depending on the model year and cones being made of paper back then would be a good idea to do some preventive maintenance.
Paper cones will degrade with age and could disintegrate with time. The flexible surround could also degrade and rip with time but can't do much with that part of the speaker. Nonetheless, I figured it would be better to do this now than wait for the cone to rip at which point would cost between $70-80 (speaker only) depending on whether it's the front or the rear.
So, I removed all speaker/enclosures and removed the plastic grilles. As I suspected, although not torn, paper cone obviously looked faded and tired. Then, per the post below, I diluted Elmer's Waterproof Wood Glue (figured extra protection against moisture) and diluted it with hot water and applied 2 coats allowing the cones to dry between the coats.
After it dried completely I reinstalled them.
First, it's good knowing that I have reversed the effect of aging, possibly leading to speaker replacement, and secondly this procedure seems to have tightened the sound quite a bit (similar to polypropylene cone speakers).
For those who intend to keep the "Bose system", at least speaker/amp part, 3 hours spent doing this may be a good investment.

http://forums.*************.com/audi...audio-faq.html

Last edited by secondchance; 11-19-2009 at 06:15 PM.
secondchance is offline   Reply With Quote
Old 11-19-2009   #2
bdw18_123
 
Join Date: Apr 2009
Location: Prather, CA
Posts: 809
Default Re: Bose Speakers

This sounds like a good mod to get the stock system to sound better. I have been a member of that forum for almost two and a half years now and I have never seen that thread.

I think the Bose system actually sounds pretty good (when it's working properly! ) and I like keeping the radio looking stock. The stock Bose system in the '93 LT1 I had sounded great, those two rear speakers have a surprising amount of bass for a stock system! I use an iPod hooked up to the stock deck with one of those cassette adapters.

I have never thought of doing this, I will probably do this mod to the stock Bose speakers I just bought for my Z. I wonder if painting a couple coats of clear automotive paint would work to accomplish the same thing? Would look a little better (I know, you can't see the speakers installed, but still... )



.
__________________
[IMG]http://i13.photobucket.com/albums/a292/bdw18_123/_zr1netforumsigphoto.jpg[/IMG][B]

1990 Corvette ZR-1 [/B][I]
White/Flame Red, #2299, mostly stock, 144K miles.[/I]
-Cams timed to the '93-'95 405HP LT5 stock timing.
-IAT sensor relocated to below front bumper.
-Haibeck hoops installed in airduct.
-OBX cat-back exhaust.
[COLOR=DarkRed][B](SOLD - December 2012 [/B][/COLOR][COLOR=DarkRed][B]:hello:)[/B][/COLOR]

1993 Corvette Coupe
Black/Black, 6-speed
(SOLD - October 2009 :hello:)

Last edited by bdw18_123; 11-19-2009 at 10:28 PM.
bdw18_123 is offline   Reply With Quote
Old 11-19-2009   #3
secondchance
 
Join Date: Aug 2006
Location: McLean, VA
Posts: 3,724
Default Re: Bose Speakers

Quote:
Originally Posted by bdw18_123 View Post
This sounds like a good mod to get the stock system to sound better. I have been a member of that forum for almost two and a half years now and I have never seen that thread.

I think the Bose system actually sounds pretty good (when it's working properly! ) and I like keeping the radio looking stock. The stock Bose system in the '93 LT1 I had sounded great, those two rear speakers have a surprising amount of bass for a stock system! I use an iPod hooked up to the stock deck with one of those cassette adapters.

I have never thought of doing this, I will probably do this mod to the stock Bose speakers I just bought for my Z. I wonder if painting a couple coats of clear automotive paint would work to accomplish the same thing? Would look a little better (I know, you can't see the speakers installed, but still... )



.
I agree that considering the size of speakers, tuned port provides surprising amount of volume and base. However, I had to add separate amp and a 10" sub to add extra meat.
As for the finish, Elmer's glue actually turn transparent - not white. When fully dried it actually restored satiney black finish to 6" rear speakers and added a little sheen to reddish rusty colored 3" fronts.
Clear paint would have the same effect. However, it may have adverse effect, like melting, of cone surround.
Elemer's being water base, only got absorbed into paper cone without any adverse effect on flexible part of the speaker.
secondchance is offline   Reply With Quote
Old 11-19-2009   #4
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
Default Re: Bose Speakers

I have a box of Bose speakers from some vettes.. I need to take inventory if anyone needs replacements
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Old 11-20-2009   #5
secondchance
 
Join Date: Aug 2006
Location: McLean, VA
Posts: 3,724
Default Re: Bose Speakers

Quote:
Originally Posted by -=Jeff=- View Post
I have a box of Bose speakers from some vettes.. I need to take inventory if anyone needs replacements
I am good. But gotta say, that's a mighty generous offer!
secondchance is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:05 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020