|
11-07-2009
|
#1 |
 
Join Date: Aug 2006
Location: Texas
Posts: 518
|
Anyone have experience with wheel spacers ?
I have heard are all kinds of tales about wheel spacers. I am about to try some and would appreciate any advice. Is there a best brand out there ? What is the secret to not breaking off studs ? Do they tend to vibrate and cause alignment issues ? Any other issues to be aware of ? Thanks, I am hoping a few of you have first hand knowledge of this subject.
__________________
1991 ZR-1, Black, Black, # 541 |
|
|
|
11-07-2009
|
#2 |
 
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: Anyone have experience with wheel spacers ?
No problems with mine, make sure you get good ones. Many runs at 115mph at the track.
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
|
|
|
11-07-2009
|
#3 |
 Join Date: Dec 2007
Location: Bloomingdale, Il
Posts: 330
|
Re: Anyone have experience with wheel spacers ?
Ive had 2 inch spacers on my C-3 to fit Z-06 wheels. No issues in two years.
|
|
|
|
|
11-07-2009
|
#4 |
|
Join Date: Dec 2006
Location: Reno, Nevada
Posts: 20
|
Re: Anyone have experience with wheel spacers ?
I've ran spacers on the front of my 85 Vette to run ZR1 rims on it for 12 years now, no issues at all. These were the good ones that cost $100+ for each corner.
__________________
90 ZR1 Dark Red/Black, Borla, 4:10, Chip 01 Z06 01 Z06 Lingenfelter 427 Twin Turbo |
|
|
|
|
11-07-2009
|
#5 |
|
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: Anyone have experience with wheel spacers ?
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
|
|
|
|
11-08-2009
|
#6 |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
|
Re: Anyone have experience with wheel spacers ?
We talkin adapters or spacers?
|
|
|
|
|
11-08-2009
|
#7 | |
|
Join Date: Aug 2006
Location: Texas
Posts: 518
|
Re: Anyone have experience with wheel spacers ?
Quote:
__________________
1991 ZR-1, Black, Black, # 541 |
|
|
|
|
|
11-08-2009
|
#8 |
|
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: Anyone have experience with wheel spacers ?
Website has both see the link.
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
|
|
|
|
11-08-2009
|
#9 | |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
|
Re: Anyone have experience with wheel spacers ?
Quote:
I asked the question because I had been investigating the same issue while thinking of Z06 wheels. Locobob may care to comment but my impression was that an adapter should be used with any thickness greater than 1/2". Also, there's the issue of hub and wheel centric. |
|
|
|
|
|
11-08-2009
|
#10 |
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
|
Re: Anyone have experience with wheel spacers ?
I use a 20mm spacer with GM Racing Wheel studs..
When ever I determine what I will do for final wheels that may change
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
