ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings
Reload this Page Headers & exhaust
Register FAQ Calendar Search Today's Posts Mark Forums Read

Reply
Page 8 of 9 « First 4567 8 9
 
Thread Tools Display Modes
Old 02-15-2014   #71
Schrade
 
Join Date: Dec 2012
Location: NC
Posts: 1,786
Default Re: Headers & exhaust
Quote:
Originally Posted by TomZR1 View Post
I know what you guys are thinking ,install them your self ,hell no it looks like a pain in the azz,not going to start something that i can't finish.
I think you can do this with 1 hand. If you we're gonna' do the PS hoses, you can do the pipes...
__________________
I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads...

( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b]

Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc...

1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3"

[IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG]
Schrade is offline   Reply With Quote
Old 02-15-2014   #72
edram454
 
edram454's Avatar
 
Join Date: Nov 2013
Location: ..
Posts: 693
Default Re: Headers & exhaust
they look great!! You will love these and they will tuck in nicely under your car. Congratulations on your purchase.

ed ramos #3028
edram454 is offline   Reply With Quote
Old 02-15-2014   #73
project c4
 
Join Date: Feb 2014
Location: Texas
Posts: 3
Default Re: Headers & exhaust
Quote:
Originally Posted by TomZR1 View Post
got my exhaust,they look awsome!!!!!!!!
If you don’t mind me asking... what diameter is the y-pipe where it goes into the resonator ?
Attached Images
File Type: jpg attachment2a.jpg (209.0 KB, 17 views)
project c4 is offline   Reply With Quote
Old 02-15-2014   #74
TomZR1
 
Join Date: Jan 2014
Location: Macomb twp,Michigan
Posts: 108
Default Re: Headers & exhaust
Don't know, I'll measure & let know
TomZR1 is offline   Reply With Quote
Old 02-15-2014   #75
project c4
 
Join Date: Feb 2014
Location: Texas
Posts: 3
Default Re: Headers & exhaust
thank you sir
project c4 is offline   Reply With Quote
Old 02-16-2014   #76
TomZR1
 
Join Date: Jan 2014
Location: Macomb twp,Michigan
Posts: 108
Default Re: Headers & exhaust
11inches
TomZR1 is offline   Reply With Quote
Old 02-17-2014   #77
project c4
 
Join Date: Feb 2014
Location: Texas
Posts: 3
Default Re: Headers & exhaust
thank you very much
project c4 is offline   Reply With Quote
Old 02-19-2014   #78
Tony Davila
 
Tony Davila's Avatar
 
Join Date: Jan 2004
Location: Enterprise, Alabama
Posts: 352
Default Re: Headers & exhaust
Quote:
Originally Posted by WARP TEN View Post
George, this is exactly what I went through. Primarily Corsas over the years but just got tired of the Loud. I have headers, no cats and last year had Marc reinstall my stock '95 system from the headers back. The only difference is I had him add electric QTP cutouts and I installed a rocker switch hidden under the carpet on the right side of the console. The only issue is I had to sacrifice the spare tire carrier. On longer trips away from home I carry the spare in the back. I added small tips to direct the exhaust to the side. So far I like the setup a lot. It is stock quiet when I want and when open I can scare children and pets and set off car alarms. I normally run slightly open for a little rumble.--Bob

This what is inside of your stock mufflers. Just in case you or anybody else was wondering. 2.75" shrinks down to 2.25" at the outlet. No wonder muffler swap gains good power improvement. I'm doing the same mod with my B&Bs.
Tony Davila is offline   Reply With Quote
Old 02-19-2014   #79
Karl
 
Karl's Avatar
 
Join Date: May 2013
Location: Chicago
Posts: 980
Default Re: Headers & exhaust
Quote:
Originally Posted by TomZR1 View Post
11inches
How large is the inlet pipe where the two pipes meet and enter the resonator... 3.5"??? Can't be 11"
__________________
1993 ZR-1 #211 Yellow On Beige Beast #2
1992 ZR-1 #427 Black On Black *Sold*
1985 L98 Blue On Blue *Sold*
Karl is offline   Reply With Quote
Old 02-19-2014   #80
We Gone
 
Join Date: Apr 2004
Location: ATL. GA.
Posts: 2,170
Default Re: Headers & exhaust
Quote:
Originally Posted by pushrod-v8 View Post
How large is the inlet pipe where the two pipes meet and enter the resonator... 3.5"??? Can't be 11"
Just checked mine, 3.5" across, 11" if you wrap the tape around the pipe.
__________________
Steve



1990 Steel Blue/Black #2355
1990 Red/Red #1473
1991 Quasar /Black #118 Sold
1991 Turquoise/Black #766 Parted Out
1993 Yellow/White #179 Sold
1990 Black/Gray #1361 Headers/4:10s Sold
We Gone is offline   Reply With Quote
Reply
Page 8 of 9 « First 4567 8 9

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 12:29 AM.

Contact Us - ZR-1 Net Registry - Archive - Privacy Statement - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020