ZR1registry Group buy (Stainless Works Headers) - Page 7 - ZR-1 Net Registry Forums

JIMSTAINLESSWORKS · 07-30-2008

MANY OF OUR CUSTOMERS DO USE THEIR FACTORY ORIGINAL GASKETS WHEN INSTALLING OUR HEADERS.

YOU ARE ABSOLUTELY RIGHT ABOUT THE NEED TO HANDLE THEM WITH EXTREME CARE . ANY RIPS OR COMPROMISE WILL IN FACT CREATE A HUGE LEAK.

WE DO NOT PROVIDE GASKETS WITH OUR SYSTEMS.

GASKETS ARE LIKE BEER.........EVERYBODY HAS THEIR FAVORITE BRAND NAME THEY SWEAR BY.

WE TRIED IT ONCE AND NO TWO PEOPLE WANTED THE SAME KIND.

NIGHTMARE!!!!!!!!!!!!!!!!!!!!!!!!!!!

ANY HARDWARE NECESSARY TO INSTALL THE SYSTEM IS INCLUDED OTHER THAN GASKETS OR BOLTS (ANOTHER PERSONAL PREFERENCE ITEM).

EXHAUST SYSTEMS HAVE EVRYTHING YOU WILL NEED.

EVERYTHING IS A DIRECT BOLT ON SO NO WELDING/CUTTING/MODIFYING WILL BE NEEDED.

IF YOU DO USE YOUR USED GASKETS................BE CAREFUL AND INSPECT THEM WELL.

BUYING A NEW SET OF GASKETS MAY BE LESS STRESSFUL THAN PUTTING YOUR HEADERS ON TWICE!!!!

ZZZZZR1 · 07-30-2008

Jim wanted me to add as well this regarding bolts (thanks Tom for his input)

MODFORDBOLTS or equivalent, which are shorter than some of the very long manifold bolts. They are (16) 8mm bolts x 1.25 long with 8mm washers.

Time frame on the headers will be much faster than anticipated.... They will have all systems out in the next 2 weeks!!!!!!!!!!

JIMSTAINLESSWORKS · 07-31-2008

I WANT TO THANK EVERYONE HERE FOR ALL THE INPUT AND COMMENTS. I WANT TO THANK DAVE HERE ON THE FORUM FOR ALL THE HELP.

HE HAS REALLY WENT ALL OUT TO BRING THIS GROUP PRICING AND NEW ZR1 HEADERS TO THE MARKET.

IT COULDNT HAVE HAPPENED WITHOUT HIM.

PRODUCTION IS GOING TO BE WAY AHEAD OF SCHEDULE. THINGS HAVE BEEN PUT ON HOLD AROUND HERE SO THAT I COULD PUSH THE ZR1 PROJECT FORWARD.

IT IS EXCITING TO SEE IT NEARING COMPLETION.

IF YOU HAVE TRIED TO CALL ME PLEASE DONT GIVE UP.

THEIR ARE TWO OF US HERE AT SW. WE FIELD A FEW HUNDRED CALLS A DAY.

PLEASE DONT GIVE UP.

ALSO...... FOR ANYONE LOOKING FOR A DEAL ON ALL YEARS OF CORVETTES AND THEIR COMPONENTS PLEASE CALL BRIAN HINSON AT HINSON SUPERCARS AT 205 267 6387.

HINSON SUPERCARS SPECIALIZES IN CHEVY LS MOTORS, TURBO SYSTEMS AND ALWAYS HAS AN ACTIVE INVENTORY OF CORVETTE HEADERS AND EXHAUSTS, TIPS, V BANDS, ETC ETC.

HE CARRIES S.W. HEADERS AND EXHAUSTS FOR ALL CORVETTE YEARS AND MODELS.

IF YOU GET A CHANCE, TIP YOUR HAT TO DAVE J.

ALSO GIVE BRIAN HINSON A CALL AND SEE WHAT GOODIES HE HAS IN STOCK.

ZZZZZR1 · 08-01-2008

Ok members....

Last call on headers. Jim just told me today the sale Ends on 8/6 and will not be offered again.

Snooze you lose!

-=Jeff=- · 08-02-2008

Quote:

Originally Posted by ZZZZZR1

Ok members....

Last call on headers. Jim just told me today the sale Ends on 8/6 and will not be offered again.

Snooze you lose!

I really wish I could order a set but it just is not the time.. guess I will pay full prcie when the time comes ..

Oh Well

ZZZZZR1 · 08-05-2008

Quote:

Originally Posted by -=Jeff=-

I really wish I could order a set but it just is not the time.. guess I will pay full prcie when the time comes ..

Oh Well

We will have permission to sell them on our site, but not @ the discount we had... But we will have a "lifetime" discount for ZR1net members.

New pictures....

ZZZZZR1 · 08-06-2008

Pictures:

xlr8nflorida · 08-06-2008

Is there a video of the sound?

[/quote]

tomtom72 · 08-06-2008

Okay my ignorance is showing.....

What's that green hose on the right header?

TIA

Tom

jonszr1 · 08-06-2008

air tube . can one still getin on the buy?

07-30-2008	#61
JIMSTAINLESSWORKS Join Date: Jun 2008 Location: OHIO Posts: 14	Re: ZR1registry Group buy (Stainless Works Headers) MANY OF OUR CUSTOMERS DO USE THEIR FACTORY ORIGINAL GASKETS WHEN INSTALLING OUR HEADERS. YOU ARE ABSOLUTELY RIGHT ABOUT THE NEED TO HANDLE THEM WITH EXTREME CARE . ANY RIPS OR COMPROMISE WILL IN FACT CREATE A HUGE LEAK. WE DO NOT PROVIDE GASKETS WITH OUR SYSTEMS. GASKETS ARE LIKE BEER.........EVERYBODY HAS THEIR FAVORITE BRAND NAME THEY SWEAR BY. WE TRIED IT ONCE AND NO TWO PEOPLE WANTED THE SAME KIND. NIGHTMARE!!!!!!!!!!!!!!!!!!!!!!!!!!! ANY HARDWARE NECESSARY TO INSTALL THE SYSTEM IS INCLUDED OTHER THAN GASKETS OR BOLTS (ANOTHER PERSONAL PREFERENCE ITEM). EXHAUST SYSTEMS HAVE EVRYTHING YOU WILL NEED. EVERYTHING IS A DIRECT BOLT ON SO NO WELDING/CUTTING/MODIFYING WILL BE NEEDED. IF YOU DO USE YOUR USED GASKETS................BE CAREFUL AND INSPECT THEM WELL. BUYING A NEW SET OF GASKETS MAY BE LESS STRESSFUL THAN PUTTING YOUR HEADERS ON TWICE!!!!

07-30-2008	#62
ZZZZZR1 Banned BANNED Join Date: Oct 2006 Location: MD Posts: 3,690	Re: ZR1registry Group buy (Stainless Works Headers) Jim wanted me to add as well this regarding bolts (thanks Tom for his input) MODFORDBOLTS or equivalent, which are shorter than some of the very long manifold bolts. They are (16) 8mm bolts x 1.25 long with 8mm washers. Time frame on the headers will be much faster than anticipated.... They will have all systems out in the next 2 weeks!!!!!!!!!!

07-31-2008	#63
JIMSTAINLESSWORKS Join Date: Jun 2008 Location: OHIO Posts: 14	Re: ZR1registry Group buy (Stainless Works Headers) I WANT TO THANK EVERYONE HERE FOR ALL THE INPUT AND COMMENTS. I WANT TO THANK DAVE HERE ON THE FORUM FOR ALL THE HELP. HE HAS REALLY WENT ALL OUT TO BRING THIS GROUP PRICING AND NEW ZR1 HEADERS TO THE MARKET. IT COULDNT HAVE HAPPENED WITHOUT HIM. PRODUCTION IS GOING TO BE WAY AHEAD OF SCHEDULE. THINGS HAVE BEEN PUT ON HOLD AROUND HERE SO THAT I COULD PUSH THE ZR1 PROJECT FORWARD. IT IS EXCITING TO SEE IT NEARING COMPLETION. IF YOU HAVE TRIED TO CALL ME PLEASE DONT GIVE UP. THEIR ARE TWO OF US HERE AT SW. WE FIELD A FEW HUNDRED CALLS A DAY. PLEASE DONT GIVE UP. ALSO...... FOR ANYONE LOOKING FOR A DEAL ON ALL YEARS OF CORVETTES AND THEIR COMPONENTS PLEASE CALL BRIAN HINSON AT HINSON SUPERCARS AT 205 267 6387. HINSON SUPERCARS SPECIALIZES IN CHEVY LS MOTORS, TURBO SYSTEMS AND ALWAYS HAS AN ACTIVE INVENTORY OF CORVETTE HEADERS AND EXHAUSTS, TIPS, V BANDS, ETC ETC. HE CARRIES S.W. HEADERS AND EXHAUSTS FOR ALL CORVETTE YEARS AND MODELS. IF YOU GET A CHANCE, TIP YOUR HAT TO DAVE J. ALSO GIVE BRIAN HINSON A CALL AND SEE WHAT GOODIES HE HAS IN STOCK.

08-01-2008	#64
ZZZZZR1 Banned BANNED Join Date: Oct 2006 Location: MD Posts: 3,690	Sale on headers Ends Wednesday 8 / 6 Ok members.... Last call on headers. Jim just told me today the sale Ends on 8/6 and will not be offered again. Snooze you lose!

08-06-2008	#67
ZZZZZR1 Banned BANNED Join Date: Oct 2006 Location: MD Posts: 3,690	Re: ZR1registry Group buy (Stainless Works Headers) Pictures:

08-06-2008	#68
xlr8nflorida Join Date: May 2008 Location: USA Posts: 1,096	Re: ZR1registry Group buy (Stainless Works Headers) Is there a video of the sound? [/quote]

08-06-2008	#69
tomtom72 Join Date: Dec 2004 Location: Jacksonville, FL USA Posts: 4,645	Re: ZR1registry Group buy (Stainless Works Headers) Okay my ignorance is showing..... What's that green hose on the right header? TIA Tom __________________ 1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member

08-06-2008	#70
jonszr1 Join Date: Sep 2006 Location: lone pine and mammoth lakes Posts: 1,407	Re: ZR1registry Group buy (Stainless Works Headers) air tube . can one still getin on the buy?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode