Plenum & Injector Housing Porting - Page 6 - ZR-1 Net Registry Forums

jss06c6 · 08-20-2018

Quote:

Originally Posted by Ccmano

Looking good Steve. I remember doing my first Z that way. It was a pain. I actually think it was easier to just pull the whole engine.
H

When I had my transmission out and with Bill B, I should have pulled the engine! Definitely would have been easier..

Sent from my QTAIR7 using ZR-1 Net Registry mobile app

jss06c6 · 09-14-2018

All parts back from powder coat. Finally going back together starting today. Gloss Black and Flame Red are going to look great on '91 #473! I'm ready to get this thing on our Dyno and throw some fuel at it. Gotta look good going fast, eh? I'm staying with OEM black for the cam cover bolts.[ATTACH][ATTACH][ATTACH]

Sent from my XT1585 using ZR-1 Net Registry mobile app

32valvZ · 09-14-2018

Beautiful!

jss06c6 · 09-14-2018

TB reassembled and ready.. the 6-0.6 metric Torx screws gave me fits removing them (small tack weld used to lock them in place). I swapped over to 8-32 button head screws and used blue thread locker. Much easier and will allow future rebuild if necessary. No DAG needed. Throttle plates have virtually no light around them! On to the final valley cleaning and reassembly..[ATTACH][ATTACH][ATTACH][ATTACH]

Sent from my XT1585 using ZR-1 Net Registry mobile app

Ccmano · 09-14-2018

Oooh, very pretty, very shiny. Can’t wait to see it all put together Steve. I do think that stainless bolts would really pop on those shiny black cam covers and the plenum.

Btw, I’m leaving on the Elk Hunt tomorrow, been really looking forward to this.
H

jss06c6 · 09-14-2018

Hans,

Thanks! Your killing me with elk envy!! I need pictures!!

Steve

Sent from my XT1585 using ZR-1 Net Registry mobile app

efnfast · 09-15-2018

Your color choice is very close to mine. I left the center strip in the plenum brushed aluminum. And I used the SS allen head caps for bolting.

jss06c6 · 09-15-2018

Quote:

Originally Posted by efnfast

Your color choice is very close to mine. I left the center strip in the plenum brushed aluminum. And I used the SS allen head caps for bolting.

Where did you get the SS Cap Screws? Jerry has them for the cam covers, what about the plenum to injector housings bolts?

Steve

Sent from my XT1585 using ZR-1 Net Registry mobile app

efnfast · 09-15-2018

Jerry has them all. They come in individually marked bags. I'm sure we pay a premium from Jerry, but that's ok.

Paul Workman · 09-15-2018

If I may suggest...

McMaster-Carr is one of the biggest industrial supply outfits. They offer a huge catalog and have on-line ordering. (M-C is where i got the bolts you are asking about, but there are other sources as well.)

FASTENAL is another industrial supply store. They're smaller than MC, but do carry most everything for my cars I ever needed, including many electrical connectors (e.g., Weather Pack, etc.) Check for local listings.

And, believe it or not, good ol' ACE HARDWARE too has a decent selection of fastener type hardware including "grade 8" stuff like flywheel bolts, I have found.

Home Depot and Menards too carry a good bit of nuts/bolts/screws/etc.

Anywayz... These are some of my favorite sources for fastener hardware of all kinds.

09-14-2018	#53
32valvZ Join Date: Nov 2007 Location: Sunshine State Posts: 1,071	Re: Plenum & Injector Housing Porting Beautiful! __________________ [B]1990 #2815[/B] [COLOR="Red"][B]Red/Red[/B][/COLOR] Ported Plenum & IH (by Pete) Haibeck Chip Rebuilt FPR (by Phil) FIC Injectors Watson LT Headers 3" Stainless Works exhaust Lingenfelter Open Air Lid Bill B Built Transmission Shifter & C Beam Plates [FONT=Impact][COLOR=red]1992 [COLOR=black]#[/COLOR] 091[/COLOR][/FONT] [FONT=Impact][COLOR=#ff0000]Red/[COLOR=silver]Gray[/COLOR][/COLOR][/FONT] [B]SOLD[/B]

09-14-2018	#55
Ccmano Join Date: Jun 2006 Location: Sparks, NV Posts: 2,852	Re: Plenum & Injector Housing Porting Oooh, very pretty, very shiny. Can’t wait to see it all put together Steve. I do think that stainless bolts would really pop on those shiny black cam covers and the plenum. Btw, I’m leaving on the Elk Hunt tomorrow, been really looking forward to this. H __________________ 90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold. Last edited by Ccmano; 09-14-2018 at 10:53 PM.

09-14-2018	#56
jss06c6 Join Date: Aug 2015 Location: Magnolia, Texas Posts: 884	Re: Plenum & Injector Housing Porting Hans, Thanks! Your killing me with elk envy!! I need pictures!! Steve Sent from my XT1585 using ZR-1 Net Registry mobile app

09-15-2018	#57
efnfast Join Date: Nov 2011 Location: Dunbarton NH Posts: 7,496	Re: Plenum & Injector Housing Porting Your color choice is very close to mine. I left the center strip in the plenum brushed aluminum. And I used the SS allen head caps for bolting.

09-15-2018	#59
efnfast Join Date: Nov 2011 Location: Dunbarton NH Posts: 7,496	Re: Plenum & Injector Housing Porting Jerry has them all. They come in individually marked bags. I'm sure we pay a premium from Jerry, but that's ok.

09-15-2018	#60
Paul Workman Join Date: Nov 2007 Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri Posts: 6,493	Re: Plenum & Injector Housing Porting If I may suggest... McMaster-Carr is one of the biggest industrial supply outfits. They offer a huge catalog and have on-line ordering. (M-C is where i got the bolts you are asking about, but there are other sources as well.) FASTENAL is another industrial supply store. They're smaller than MC, but do carry most everything for my cars I ever needed, including many electrical connectors (e.g., Weather Pack, etc.) Check for local listings. And, believe it or not, good ol' *ACE HARDWARE* too has a decent selection of fastener type hardware including "grade 8" stuff like flywheel bolts, I have found. *Home Depot* and *Menards* too carry a good bit of nuts/bolts/screws/etc. Anywayz... These are some of my favorite sources for fastener hardware of all kinds. __________________ Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry Last edited by Paul Workman; 09-15-2018 at 09:16 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode