wheel refinishing?

[WVZR-1]

If these wheels are going to be "with you" for a while doing the "four" creates a "known" - doing two regardless of process certainly leaves the possibility of "disappointment". Doing the "four" also creates the known for a future need if there should become a need for a single or touch up of sorts.

Borrow a set of something in the vicinity to store the car on, do the four in what ever process you determine to be economical and can produce your desired results. There's no second thought of if you made the right choice or not.

Are your intentions to use the hardware over?

[BigJohn]

They are Aluminum, right???

[-=Jeff=-]

Originally Posted by WVZR-1

If these wheels are going to be "with you" for a while doing the "four" creates a "known" - doing two regardless of process certainly leaves the possibility of "disappointment". Doing the "four" also creates the known for a future need if there should become a need for a single or touch up of sorts.

Borrow a set of something in the vicinity to store the car on, do the four in what ever process you determine to be economical and can produce your desired results. There's no second thought of if you made the right choice or not.

Are your intentions to use the hardware over?

Yes was hoping to.. why do I have to replace that too? of so I will not do anything for a while then.. From what I gather the 40ish bolts per wheel are titanium and not cheap

Originally Posted by BigJohn

They are Aluminum, right???

Yes aluminum wheels

[WVZR-1]

Originally Posted by -=Jeff=-

Yes was hoping to.. why do I have to replace that too? of so I will not do anything for a while then.. From what I gather the 40ish bolts per wheel are titanium and not cheap

I was more curious about your plans, I would doubt the titanium hardware because of the initial expense when constructed. Titanium is usually an option that costs sometimes considerably more. It's then debated whether you replace nuts or bolts or both. I don't know the original build specs but the argument bolts or nuts get more involved. Are the nuts "ny-loc" or just "prevailing torque" or neither and just maybe lock-tited? Titanium unless an alloy with a high iron content I don't believe is considered highly magnetic. Yours?

[-=Jeff=-]

So I don't know what the material is, i can take a magnet to it and see.. Last time I had them apart I used Blue Lock Tite and torqued to 18-20 ft lbs

I was planning on doing the same, if I can find out what material the bolts are I have one wheel with different style bolts, it would be nice to have all 4 the same..

Would if someone at speedline would know

[WVZR-1]

Originally Posted by -=Jeff=-

So I don't know what the material is, i can take a magnet to it and see.. Last time I had them apart I used Blue Lock Tite and torqued to 18-20 ft lbs

I was planning on doing the same, if I can find out what material the bolts are I have one wheel with different style bolts, it would be nice to have all 4 the same..

Would if someone at speedline would know

12 point hardware shouldn't be that difficult to match and I'm guessing that's what they should be. ARP does some as well. I would think if you removed one and spec'd that one it would/should be an easy find. Maybe not but I don't see why not! 18 - 20 ft lb seems maybe light but then again I've read 28 - 30 so? I wouldn't think you need to be concerned with "stretch" at something 30 ft lb or less so Loctite I'd guess should do. What thread are they? I'd like to think metric or if not an SAE fine pitch rather than USS.

You could "chuck-up" the bolts I'd think in a rotary tool and polish with steel wool. 40 times per = awhile!

[-=Jeff=-]

Yeah I am going by memory, it might have been 25

I do agree I should be able to find one fo the 2 styles to match.. my luck is I will find the match where I will need 120 .. LOL

[-=Jeff=-]

Okay,

Went to the wheel refinisher today. He has a color/metallic that will be close to what I have. I bring him 4 centers.. $300 Out the door ($75 each)

now I need to break them down and drop them off..

Sounded like less then a week to do.. (essentially a couple days)

[LGAFF]

That's more like it "$300"

[-=Jeff=-]

right, before I was getting a verbal without seeing it quote..

Now I have it written down from them on a card.. It is convenient to get them there and pick them up.. Need to disassemble them now