Fender badge

[-=Jeff=-]

since I currently have the badges on the brakes for the moment.. I think I am going to remove the ZR-1 stickers off the hood

I still have not decided if/where I will put the LT5 emblems, I have one on the back of the car, but since my ZR-1 badge is black/red the sliver LT5 does not look quite right

When I got the car the rear badge was black/red so i changed the 'CORVETTE' to match

[-=Jeff=-]

Originally Posted by Daniel_Mc

Grab one if it's no big deal.

I looked at polishing the AP calipers on our Z and opted for powder coating over polish for maintenance reasons. The "almost chrome" coating is very close to polish and my guy could do the Wilwood logo for you also. He is very good and very reasonable. Regardless of what direction you choose it'll look good.

-Daniel

Somewhat current side shot:

[Mystic ZR-1]

Originally Posted by BigJohn

What!
I have one on the rear bumper just like your car.
My car is ready, is yours???

Ready for what?
Ready enough to go to the UCONN show Sunday.
2700+ cars there, but only one ZR-1! (says so on the back bumper)
Talk about feeling old???
My car was older than 95% of the people there...

[-=Jeff=-]

Originally Posted by Mystic ZR-1

Talk about feeling old???
My car was older than 95% of the people there...

You know.. I NEVER thought of that (or realized that either)

in reference to my car at car shows/cruise nights

[BigJohn]

Originally Posted by Mystic ZR-1

Ready for what?
Ready enough to go to the UCONN show Sunday.
2700+ cars there, but only one ZR-1! (says so on the back bumper)
Talk about feeling old???
My car was older than 95% of the people there...

Only because you didn't tell anyone!

[Daniel_Mc]

Originally Posted by -=Jeff=-

Somewhat current side shot:

Jeff,

Looking at the way the car sits now I like the small splash logo. The logo could maybe be a very small amount larger and just a bit up and back more but that is personal preference. I like the look of your car because firstly it is different from the other cars sporting the OEM fender badge (seems like everyone rocks that look). Secondly the red really goes with the theme of your car the red calipers, the (what looks like later C4 red/black) interior, and other small touches of red throughout your black car is a good look IMHO! The Shelby wheels just top off the car. If it wasn't for holes in the rear bumper I'd say put the splash logo on to replace the OEM unit. Again it is your car and it is all in what YOU want. Its only a sticker. Another thought is remove the fender badge all together and place the splash logo on the rear of the rocker just in front of the rear tire. Not as noticeable as the hood placement but different.

-Daniel

[-=Jeff=-]

Yes good eye on the interior:

[aafc]

Here are three badges i added to my car.
1. right rear
2. high rise hood
3. side fender

[-=Jeff=-]

Aafc,
Can you post a shot of the whole car.. I would like to see the hood..

Thanks

[aafc]

Jeff,
Here are a few pic of my high rise hood ( Toledo-Pro ). stripes are 3M
tape (fake carbon fiber)






Last year in June i installed power portal window into the high rise hood.




Same hood from the under side.



Hope you like them.