05-23-2008 | #21 |
Join Date: Oct 2007
Location: lone pine and mammoth lakes ca.
Posts: 544
|
Re: What do i need to hit 11.9-12.2 range
OK HADI HELP AN OLD FELLA OUT WHICH KIT DID YOU GET . THERE GOT TO BE 50 DIFFERENT ONE I WANT TO GET THAT BATTERY TOO . HELP PLEASE THANX
|
05-23-2008 | #22 |
Guest
Posts: n/a
|
Re: What do i need to hit 11.9-12.2 range
Brad . stop playing with me!
Summit part # TAY-48000 . 2-Gauge Cables. Last edited by HADI-ZR1; 05-23-2008 at 12:31 PM. |
05-23-2008 | #23 |
Join Date: Oct 2007
Location: lone pine and mammoth lakes ca.
Posts: 544
|
Re: What do i need to hit 11.9-12.2 range
ah hadi . if ya cant have fun with your buddies thewn it aint no fun at all. tahnx pards
|
05-23-2008 | #24 |
Join Date: Jan 2007
Location: Indianapolis, IN
Posts: 35
|
Re: What do i need to hit 11.9-12.2 range
With a little practice in your launch technique with street radials, you should be able to get to the high end of your performance window given the mods. My car, with much less aggressive top end porting than yours(done 10 years ago, @380rwhp)) clicks off consistent 12.3-.4s@117 with a 2.1 60ft(on old Michelin Pilot Sports). It's quite possible, with practice, to get a 1.9 with fresh, new street radial rubber in a ZR-1. And that would get your right into that 12.1-.2 range. FWIW, if you put drag radials on it, you would probably eclipse the 11.9 with relative ease.
Brian A. 90 ZR-1 12.09@118 01 Z06 not quite stock |
05-23-2008 | #25 |
Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,679
|
Re: What do i need to hit 11.9-12.2 range
Lee if you wanna hit 11's with a street radial tire you will need a clutch almost everytime.
I have hit 11.50's 11.60's @ 123mph on GSC's when i was making 438rwhp 1.80's 60ft after a few of those i had to replace the clutch. Since i didn't want the tires to slip i would slip the clutch to get a decent 60ft Moral of the story you can't have your cake and eat too. Also remember 117 mph with these horsepower #'s you are making you will need to get a 1.60's 60ft which is very hard to do with street radials. I have tried and went thru alot of clutchs trying. Pete
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
05-24-2008 | #26 | |
Join Date: Sep 2005
Location: Washington
Posts: 955
|
Re: What do i need to hit 11.9-12.2 range
Quote:
|
|
05-24-2008 | #27 |
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: What do i need to hit 11.9-12.2 range
|
05-24-2008 | #28 |
Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,679
|
Re: What do i need to hit 11.9-12.2 range
With one of these you will have the dreaded common clutch patel sticking to the floor.
You can't get a big fat chicken that don't weigh alot. If your racing your paying one way or another,no matter what you buy. I would love to find a cheap C5 ZO6 and put a crate LS7 in it,of course port the heads a bit with a cam change. Pete
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
05-24-2008 | #29 |
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: What do i need to hit 11.9-12.2 range
Pete, How does spring rate come into play?
LGAFF 92 ZR1 #234 |
05-24-2008 | #30 | |
Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,679
|
Re: What do i need to hit 11.9-12.2 range
Quote:
Spring Rate??? . Pete
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
|
Thread Tools | |
Display Modes | |
|
|