Radiator - Page 3 - ZR-1 Net Registry Forums

bobbyhi · 09-19-2007

Quote:

Originally Posted by jonszr1

on those little screws . i know some might find it mickey mouse but i used small tie wraps which after 7 months are still holding

I got 5 out of the 6 screws back in. Couldn't get the passenger side top on to line up so the hell with it!!!!! I have the red hoses and air hose. Looks good on the white car. With this project out of the way I just maybe tackle the plenum and covers and also send them out to Jeff (winter project). I haven't looked into the pricing yet.

tomtom72 · 09-20-2007

Most of my screws got lost. My driver's side didn't work out back to OEM specs, the Pass side was okay though. My rad is clean & my temps come right down with any air flow at all. Okay so I'll not get any restoration points....but the car don't over heat in b to b traffic in NYC!....if I leave the air on the gauge goes backwards.

I'm happy with the way mine came out....it works!

Bobby!

DaveK · 09-20-2007

Congratulations Bob!

Good to hear you're back on the road again - that must look nice with the red hoses

Are you thinking of going for white on the cam covers and plenum to match?

Dave

bobbyhi · 09-20-2007

Yes I would probably go with the white with red lettering. But then again, I really like the black chrome. I also like the red but think it is too much bling. Have to see what the pricing is before I decide.

09-20-2007	#22
tomtom72 Join Date: Dec 2004 Location: Jacksonville, FL USA Posts: 4,645	Re: Radiator Most of my screws got lost. My driver's side didn't work out back to OEM specs, the Pass side was okay though. My rad is clean & my temps come right down with any air flow at all. Okay so I'll not get any restoration points....but the car don't over heat in b to b traffic in NYC!....if I leave the air on the gauge goes backwards. I'm happy with the way mine came out....it works! Bobby! __________________ 1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member

09-20-2007	#23
DaveK Join Date: Jul 2004 Location: Sudbury, Ontario. Canada Posts: 1,538	Re: Radiator Congratulations Bob! Good to hear you're back on the road again - that must look nice with the red hoses Are you thinking of going for white on the cam covers and plenum to match? Dave __________________ 1991 #1516 Black/Black davidmkelly.com "Speed is often confused with insight." - Johan Cruijff Last edited by DaveK; 09-20-2007 at 02:11 PM.

09-20-2007	#24
bobbyhi Join Date: Jul 2005 Location: Mendota Heights, MN. 55120 Posts: 984	Re: Radiator Yes I would probably go with the white with red lettering. But then again, I really like the black chrome. I also like the red but think it is too much bling. Have to see what the pricing is before I decide. __________________ Bob Anderson 1990 #2405 White/Gray Haibeck chip,4:09 gears,Power Effects Exhaust,5 spoke chrome,C5 brakes,49th Street rockers,K&N,Hurst,Headers,Upper & lower ported Minnesota State Director Founding Member #19

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode