ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 General Postings
Reload this Page Console cup holder
Register FAQ Calendar Search Today's Posts Mark Forums Read

Reply
Page 3 of 6 12 3 456
 
Thread Tools Display Modes
Old 08-04-2018   #21
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
Default Re: Console cup holder
Quote:
Originally Posted by geezer View Post
With respect Sir...… based on my 1 owner 1990 they Did Not have a cup insert. My '90 was never out of my sight from the moment it rolled off the Carrier Truck at the dealer. Just a little anal about the ZR1 arrival ;;ya think!!
Nobody doubts you didn't get one. However these are soft goods and dealer prep items. Just like the console book, floor mats, demo cassettes and yes the rubber console cup. It was up to each dealer to make sure these went with every new sale. Sometimes THAT does not happen. However it was Susposed to have one. GC
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)
GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V
GOLDCYLON is offline   Reply With Quote
Old 08-05-2018   #22
Dynomite
 
Dynomite's Avatar
 
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,797
Default Re: Console cup holder
Quote:
Originally Posted by GOLDCYLON View Post
Nobody doubts you didn't get one. However these are soft goods and dealer prep items. Just like the console book, floor mats, demo cassettes and yes the rubber console cup. It was up to each dealer to make sure these went with every new sale. Sometimes THAT does not happen. However it was Susposed to have one. GC
Daryll...…. I think you have the correct Description of the "Cup Holder" issue

Without the cup rubber insert the "cup holder" definitely looks incomplete and loose change would definitely find its way under the console as I have observed many times when removing the console. I forget which "cup holder" contains the cigarette holder which cigarette holder I always replace with the rubber cup holder insert.

And you are also correct as I have tossed several soda cans with the rubber cup holder attached
Last edited by Dynomite; 08-05-2018 at 12:51 AM.
Dynomite is offline   Reply With Quote
Old 08-05-2018   #23
Mystic ZR-1
 
Mystic ZR-1's Avatar
 
Join Date: Jan 2010
Location: Mystic CT
Posts: 2,633
Default Re: Console cup holder
Anyone know where NCRS officially stands on this important subject?
Mystic ZR-1 is offline   Reply With Quote
Old 08-05-2018   #24
TX '90 ZR1
 
TX '90 ZR1's Avatar
 
Join Date: Oct 2017
Location: TX
Posts: 2,039
Default Re: Console cup holder
Quote:
Originally Posted by Mystic ZR-1 View Post
Anyone know where NCRS officially stands on this important subject?
I have no clue where NCRS stands on this subject, but it is attracting so much attention I better get me one!
I guess I have always needed a "Can Condom" (as GOLDCYON calls them), just didn't know I did!!!
__________________
Kenny
1990 #442
TX '90 ZR1 is online now   Reply With Quote
Old 08-05-2018   #25
Mystic ZR-1
 
Mystic ZR-1's Avatar
 
Join Date: Jan 2010
Location: Mystic CT
Posts: 2,633
Default Re: Console cup holder
Yeh, me too.
Think I'll get 2 'cause they're so easy to lose....
Mystic ZR-1 is offline   Reply With Quote
Old 08-05-2018   #26
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
Default Re: Console cup holder
Quote:
Originally Posted by Mystic ZR-1 View Post
Anyone know where NCRS officially stands on this important subject?
Honestly they don't care. It's not a point deduction at this moment
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)
GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V
GOLDCYLON is offline   Reply With Quote
Old 08-05-2018   #27
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
Default Re: Console cup holder
Quote:
Originally Posted by Mystic ZR-1 View Post
Yeh, me too.
Think I'll get 2 'cause they're so easy to lose....
When you install it and use it as it was meant to be used you will quickly see why I call it what I call it. It fits like a glove to the bottom lol
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)
GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V
GOLDCYLON is offline   Reply With Quote
Old 08-05-2018   #28
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
Default Re: Console cup holder
Quote:
Originally Posted by Reichert View Post
My 1990 didn't have with an insert either when I bought it - just the ash tray. But honestly, it seems wrong, as it is easy for stuff to fall through the hole when the tray is open and the console bezel screw is showing. So I bought a couple of the liners from corvette central. They are really flimsy but get the job done.

I was also missing those little triangle inserts for the seat position switches, which made me think the cup holder liner was also lost to time and neglect.
Normally the triangle inserts.. called light covers by GM were easily vacuumed up by folks cleaning up the console area. Trying to get dirt and grime out of those voids lines along by sides of the switches. If you are not doing the cleaning nobody is going to stop to pull the vacuum bag for recovery. When I bought my 90 it was missing the light covers as well.
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)
GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V
Last edited by GOLDCYLON; 08-05-2018 at 04:37 PM.
GOLDCYLON is offline   Reply With Quote
Old 08-05-2018   #29
BigJohn
 
BigJohn's Avatar
 
Join Date: Feb 2012
Location: Ledyard,CT
Posts: 8,253
Default Re: Console cup holder
Quote:
Originally Posted by Mystic ZR-1 View Post
Anyone know where NCRS officially stands on this important subject?
Didn’t see you at Harry’s!
BigJohn is offline   Reply With Quote
Old 08-05-2018   #30
geezer
 
Join Date: Aug 2010
Location: ottawa canada
Posts: 156
Default Re: Console cup holder
The official NCRS position is …. They did come with inserts!!! I too will have to obtain one.

Thanks all for your input!!
geezer is offline   Reply With Quote
Reply
Page 3 of 6 12 3 456

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 10:58 AM.

Contact Us - ZR-1 Net Registry - Archive - Privacy Statement - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020