Itty Bitty Bulb needed - Page 3 - ZR-1 Net Registry Forums

WVZR-1 · 05-25-2017

I thought I had a LH switch panel with switches and I stumbled upon it today.

The window switch takes a pair of what is a T3 base with a height that differs from the links that I posted but a very clever person could use miniature bulbs with a wire terminal and salvage the base.

The mirror appears to be a T4 base and a very clever person could use a bulb with wire terminal to do a repair.

A T3 LED of some color would likely work but I doubt a color match possible and then to how to determine the brightness. I don't use and have no interest in LED for anything automotive that ain't OE.

Z51JEFF · 05-25-2017

Quote:

Originally Posted by BlackZR1

My parts book says 10148011:
http://www.ebay.com/itm/NOS-OEM-GM-L...VXq42x&vxp=mtr

I just bought this part from GM PARTSGIANT. The bulb was $14 +shipping. I have no idea what I bought if the bulb isn't separate from the switch.

Z51JEFF · 05-27-2017

I just got the bulb and I believe it's the bulb the OP is looking for,when Photobucket wants to cooperate I'll post a picture

WVZR-1 · 05-28-2017

OP - Where did you disappear to?

You've got a non-working so you can disassemble risking no loss at all. The amber filter is flexible and I've found some of my older work and believe there are very inexpensive solutions. I'm not un-wiring mine!

http://www.jkllamps.com/pdfs/CNW1_MULTI_LISTING.pdf

I'd shop either a T1 or T1 1/4 wire terminal and try a re-wire and the old amber filter. If a T1 1/4 would work I believe that Bulb Town has a filter also. No filter for the T1.

Young1 · 05-31-2017

I am the op and just returned from mountain trip with Z. I cleaned her up and will get to the itty bitty bulb measuring this Saturday. Along with getting to some codes. She was rebellious three times

Young1 · 06-03-2017

Me the OP just ordered T3 Neowedge bulbs on EBay. A four pack of what appears incadesense bulbs for five bucks. I can reuse the little condom like orange filter. I will report back when they arrive in a week.

Young1 · 06-10-2017

Quote:

Originally Posted by WVZR-1

"BlackZR1" posted correct information for "just bulb".

This is the bulb only!

OP - I've never attempted to match the bulb/socket and I've only ever seen it referenced to a Stanley #

If you've the bulb/socket removed presently I'd try to compare dimensions to a T3, T4. Dimensions are in the link.

http://www.autolumination.com/74.htm

Easier to read dimensions

https://www.ebay.com/p/?iid=382069402972&&&chn=ps

Many years ago I did several switch back-lighting projects for other than Corvette projects that used some Pontiac/Olds/Buick lighting. I believe I actually sourced most of the project using MOPAR.

This is from a later C4 FSM - Bulb charts are in the 8B & 8C sections of the FSM. The Stanley reference information is there also.

Attachment 6195

OP. It is indeed a T3 NeoWedge bulb. I purchased from a generic vendor on EBAY. Four bulbs for 5 dollars.

Sent from my iPhone using ZR-1 Net Registry

GOLDCYLON · 06-10-2017

Thanks for closing out the post. GC

05-25-2017	#21
WVZR-1 Join Date: Oct 2004 Posts: 1,890	Re: Itty Bitty Bulb needed I thought I had a LH switch panel with switches and I stumbled upon it today. The window switch takes a pair of what is a T3 base with a height that differs from the links that I posted but a very clever person could use miniature bulbs with a wire terminal and salvage the base. The mirror appears to be a T4 base and a very clever person could use a bulb with wire terminal to do a repair. A T3 LED of some color would likely work but I doubt a color match possible and then to how to determine the brightness. I don't use and have no interest in LED for anything automotive that ain't OE. Last edited by WVZR-1; 05-28-2017 at 10:30 AM.

05-27-2017	#23
Z51JEFF Join Date: Dec 2007 Location: Fremont,Ca Posts: 3,079	Re: Itty Bitty Bulb needed I just got the bulb and I believe it's the bulb the OP is looking for,when Photobucket wants to cooperate I'll post a picture

05-28-2017	#24
WVZR-1 Join Date: Oct 2004 Posts: 1,890	Re: Itty Bitty Bulb needed OP - Where did you disappear to? You've got a non-working so you can disassemble risking no loss at all. The amber filter is flexible and I've found some of my older work and believe there are very inexpensive solutions. I'm not un-wiring mine! http://www.jkllamps.com/pdfs/CNW1_MULTI_LISTING.pdf I'd shop either a T1 or T1 1/4 wire terminal and try a re-wire and the old amber filter. If a T1 1/4 would work I believe that Bulb Town has a filter also. No filter for the T1. Last edited by WVZR-1; 05-28-2017 at 02:51 PM.

05-31-2017	#25
Young1 Join Date: Sep 2016 Location: Ocala, FL Posts: 900	Re: Itty Bitty Bulb needed I am the op and just returned from mountain trip with Z. I cleaned her up and will get to the itty bitty bulb measuring this Saturday. Along with getting to some codes. She was rebellious three times

06-03-2017	#26
Young1 Join Date: Sep 2016 Location: Ocala, FL Posts: 900	Re: Itty Bitty Bulb needed Me the OP just ordered T3 Neowedge bulbs on EBay. A four pack of what appears incadesense bulbs for five bucks. I can reuse the little condom like orange filter. I will report back when they arrive in a week.

06-10-2017	#28
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: Itty Bitty Bulb needed Thanks for closing out the post. GC __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode