2nd winter project done Street Shop and rear Wilwoods - Page 3 - ZR-1 Net Registry Forums

GOLDCYLON · 01-26-2017

Non marring fastener attached to banski trailing arms no other to keep this cable in position and towards the right direction. I believe Dom did the same thing to his dog bones

GOLDCYLON · 01-28-2017

Clarification....I've been repeating the word "Teflon" washers as repeatedly stated over at Corvette Forum. These are not teflon but stamped metal with a nitrle coating. I have no idea why somebody would mistake that for teflon unless they had no idea what the coating was or is. GC

GOLDCYLON · 01-28-2017

Phil do you need anymore pics of the underside?

GOLDCYLON · 01-28-2017

Quote:

Originally Posted by -=Jeff=-

cool!! glad you finally got them installed

Thanks -=JEFF=- you know how long I have been planning this one....and saving for this one

Jagdpanzer · 01-28-2017

Thank you for posting the photos GC.
Still not clear to me how the new cables mate up to the existing E brake cable.
Do the new cables come with brake kit?

XfireZ51 · 01-28-2017

Quote:

Originally Posted by Jagdpanzer

Thank you for posting the photos GC.
Still not clear to me how the new cables mate up to the existing E brake cable.
Do the new cables come with brake kit?

phil,

No, u need to buy universal cables and then cut to length and make them up. U get them from Lokar. Perhaps Darryl can measure the length for u.
BTW, I used electrical conduit holders on the dog bones. And some split rubber hose between them and the dog bones as extra grip.

GOLDCYLON · 01-28-2017

Here is a picture of the GM stamped metal washers that you need to stack as recommended by Dom. Without these washers you won't get clearance you need for the unit when you tighten everything up

GOLDCYLON · 01-28-2017

Here's is the part number of the rear C5 Wilwood kit I used that fit behind my 17 inch wheels.

GOLDCYLON · 01-28-2017

Quote:

Originally Posted by XfireZ51

phil,

No, u need to buy universal cables and then cut to length and make them up. U get them from Lokar. Perhaps Darryl can measure the length for u.
BTW, I used electrical conduit holders on the dog bones. And some split rubber hose between them and the dog bones as extra grip.

Dom is correct I used the Lokar cable. I bought my streetshop setup used over at Corvette Forum and the cables where already made up. Here is a link for you Phil

https://www.amazon.com/Lokar-EC-80FU...ng+brake+cable

Jagdpanzer · 01-28-2017

Did the Lokar cables replace all of the original cables? Did you also have to replace the E brake hand lever?

01-26-2017	#21
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: 2nd winter project done Street Shop and rear Wilwoods Non marring fastener attached to banski trailing arms no other to keep this cable in position and towards the right direction. I believe Dom did the same thing to his dog bones __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V Last edited by GOLDCYLON; 01-28-2017 at 02:21 PM.

01-28-2017	#22
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: 2nd winter project done Street Shop and rear Wilwoods Clarification....I've been repeating the word "Teflon" washers as repeatedly stated over at Corvette Forum. These are not teflon but stamped metal with a nitrle coating. I have no idea why somebody would mistake that for teflon unless they had no idea what the coating was or is. GC __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V Last edited by GOLDCYLON; 06-12-2019 at 11:50 AM.

01-28-2017	#23
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: 2nd winter project done Street Shop and rear Wilwoods Phil do you need anymore pics of the underside? __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

01-28-2017	#25
Jagdpanzer Join Date: Apr 2007 Location: Northern VA Posts: 2,661	Re: 2nd winter project done Street Shop and rear Wilwoods Thank you for posting the photos GC. Still not clear to me how the new cables mate up to the existing E brake cable. Do the new cables come with brake kit? __________________ Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake

01-28-2017	#27
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: 2nd winter project done Street Shop and rear Wilwoods Here is a picture of the GM stamped metal washers that you need to stack as recommended by Dom. Without these washers you won't get clearance you need for the unit when you tighten everything up __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V Last edited by GOLDCYLON; 01-28-2017 at 04:31 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode