|
08-18-2013
|
#21 |
 Join Date: Jan 2013
Location: San Antonio
Posts: 107
|
Re: Any interest in door sill protectors?
Yeah I will probably do the same too...
|
|
|
|
08-18-2013
|
#22 | |
   
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: Any interest in door sill protectors?
Quote:
X 1 more
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
|
08-18-2013
|
#23 | |
Join Date: Feb 2012
Location: Ledyard,CT
Posts: 8,253
|
Re: Any interest in door sill protectors?
Quote:
Why only one???? 
|
|
|
|
|
|
08-18-2013
|
#24 | |
 
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,797
|
Re: Any interest in door sill protectors?
Quote:
I knew you would be on board Daryll......  Now to get you involved with the Billet Aluminum Belt Tensioner Pulley, The Fuel Line Billet Aluminum Bracket by Carter, and the Red Tow Adapter  Oh....and you just got to get one of Carter's Oil Filter Billet Aluminum Covers 
|
|
|
|
|
|
08-18-2013
|
#25 |
|
Join Date: May 2013
Location: Hillsborough, New Jersey
Posts: 11
|
Re: Any interest in door sill protectors?
Count me in for a set.
|
|
|
|
|
09-02-2013
|
#26 |
Join Date: Dec 2007
Location: Fremont,Ca
Posts: 3,079
|
Re: Any interest in door sill protectors?
I just talked to the water jet guy and hes going to look into some material.I cant find the brushed aluminum so Im looking at brushed stainless steel at 1/8 inch thick.These are the decals Im going to have made,I had these made years ago.Im open to options as far as colors but nothing fancy,basic body colors and maybe the full ZR-1 emblem in body color meaning it will look like the hood-bumper emblem if I can get the detail right and it looks good,if you get the piece too small you cant get multiple layers of the vinyl to pick up the detail.[IMG]
 [/IMG]
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
