02-03-2011 | #21 |
Join Date: Apr 2010
Location: O'Fallon, Mo
Posts: 738
|
Re: LT5 into GTO project
.
Last edited by todesengel; 03-02-2011 at 01:18 AM. |
02-03-2011 | #22 |
Join Date: Apr 2010
Location: O'Fallon, Mo
Posts: 738
|
Re: LT5 into GTO project
I am replacing the monster power booster with a 8" one to create more room. once I decided what I am going to do with the cross-member I am going to cut the tunnel out, and start fabricating a new one for the car using the piece I got from xfire as a starting point. I have come up with a couple really different plans for pipe routing, and custom pieces on this build once it begins to progress. I'm pretty excited about this one!
Last edited by todesengel; 02-03-2011 at 10:27 PM. |
02-03-2011 | #23 | |
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,710
|
Re: LT5 into GTO project
F*ing awesome.
Quote:
|
|
02-04-2011 | #24 |
Join Date: Oct 2010
Location: Sedalia, MO
Posts: 150
|
Re: LT5 into GTO project
Looking good! Looks like a labor of love.
|
02-04-2011 | #25 |
Join Date: Apr 2004
Location: Germantown, MD
Posts: 738
|
Re: LT5 into GTO project
Very cool.
|
02-04-2011 | #26 |
Join Date: Mar 2006
Location: Innsbrook, Missouri
Posts: 1,727
|
Re: LT5 into GTO project
cool Rob, if you need any help tugging on parts let me know i will tear myself away from the puppies.
you gonna twin turbo that Lt 5 ?? |
02-04-2011 | #27 |
Join Date: Apr 2010
Location: O'Fallon, Mo
Posts: 738
|
Re: LT5 into GTO project
No photos today. I went to the shop but I spent more time on the phone than wrenching
I ground the sbc mounts off the subframe, I am just going to start fresh. I removed the pan from the engine, to modify it. The gods must have been smiling on me because I found a bunch more sections of broken rollers in the pickup. This cause me to start pulling the bearings, I am going to mic them all and check for wear . I decided to modify the pan instead of the cross member. I really want to drive the wheels off of this car, and would rather leave the support and strength in it that has already survived 40 years. I marked out how much I need to cut from the tunnel, and it is a whopper for sure. It is amazing how bif this engine is when you put it next to a regular 350 sbc. I removed the power booster and steering rod. I need to go with a link system for the rod as the way it sits now will interfere with the head. SW headers will not work as is. I am either going to cut and box the subframe, or just modify the headers to work. I most likely will modify the headers as it is the lesser of two evils, imho. Tomorrow I plan to cut the tunnel out, and make myself a template out of light gauge aluminum. One of the local shops here offered to sell me an entire c5 dash, center console, hvac system, wiring harness, basically everything I want out of the vete interior for 1,000. I am now considering installing this in the gto, but am torn as I kind of like the old school styling compare with todays plastics. |
02-04-2011 | #28 |
Join Date: Apr 2010
Location: O'Fallon, Mo
Posts: 738
|
Re: LT5 into GTO project
|
02-04-2011 | #29 |
Join Date: Mar 2004
Location: Found Member
Posts: 4,346
|
Re: LT5 into GTO project
Last edited by FU; 02-04-2011 at 08:49 PM. |
02-04-2011 | #30 | |
Join Date: Apr 2010
Location: O'Fallon, Mo
Posts: 738
|
Re: LT5 into GTO project
yeah, but that is for a narrow lil lsx engine, and small t-56 trans. Not much of it pertains to what I am doing. The lsx is done to death. The lt5 is more to my liking, and it will be a one of a kind. I don't need a flashy car, but I like for them to be different from the pack
Quote:
|
|
Thread Tools | |
Display Modes | |
|
|