ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 03-15-2023   #11
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
Default Re: Wilwood Brake question

Jay the 6 piston narrowites will fit under the 17 inch Sawblades, 17 inch A molds and the 17 inch Fikse FM-5s
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)

GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V
GOLDCYLON is offline   Reply With Quote
Old 03-15-2023   #12
JT ZR-Won
 
Join Date: Aug 2021
Location: Bradenton, FL
Posts: 138
Default Re: Wilwood Brake question

Quote:
Originally Posted by GOLDCYLON View Post
Jay the 6 piston narrowites will fit under the 17 inch Sawblades, 17 inch A molds and the 17 inch Fikse FM-5s
That's good to know... I'm assuming the Dymags as well. I'm really concerned about them clearing the rear Dymags
JT ZR-Won is offline   Reply With Quote
Old 03-15-2023   #13
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
Default Re: Wilwood Brake question

Quote:
Originally Posted by JT ZR-Won View Post

ps... my Dad told me to tell you hello!

Jay
Same back to him, I should email him, but it would take him a week to type out the reply.. LOL

Quote:
Originally Posted by JT ZR-Won View Post
That's good to know... I'm assuming the Dymags as well. I'm really concerned about them clearing the rear Dymags
They should, the rears are smaller than the front. I don't see any issues with the Wilwoods not working with Dymags
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Old 03-16-2023   #14
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
Default Re: Wilwood Brake question

Quote:
Originally Posted by JT ZR-Won View Post
That's good to know... I'm assuming the Dymags as well. I'm really concerned about them clearing the rear Dymags
I am not sure on the Dymags TBH. I was the Guinea pig for the the FIKSE FM-5s.

I bought my fronts used on Craigslist when a gent sold his 94 corvette and he was rocking that setup behind sawblades.

I had to pay full boat for the 4 piston rear Wilwoods. Not cheap but plenty of room in the rears.
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)

GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V

Last edited by GOLDCYLON; 03-16-2023 at 02:23 AM.
GOLDCYLON is offline   Reply With Quote
Old 03-16-2023   #15
JT ZR-Won
 
Join Date: Aug 2021
Location: Bradenton, FL
Posts: 138
Default Re: Wilwood Brake question

That's great, thanks for the info!

Quote:
Originally Posted by GOLDCYLON View Post
I am not sure on the Dymags TBH. I was the Guinea pig for the the FIKSE FM-5s.

I bought my fronts used on Craigslist when a gent sold his 94 corvette and he was rocking that setup behind sawblades.

I had to pay full boat for the 4 piston rear Wilwoods. Not cheap but plenty of room in the rears.
JT ZR-Won is offline   Reply With Quote
Old 03-16-2023   #16
JT ZR-Won
 
Join Date: Aug 2021
Location: Bradenton, FL
Posts: 138
Default Re: Wilwood Brake question

Quote:
Originally Posted by -=Jeff=- View Post
Same back to him, I should email him, but it would take him a week to type out the reply.. LOL
This is true! haha!
JT ZR-Won is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:43 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020