Cam Sensor Questions - Page 2 - ZR-1 Net Registry Forums

Karl · 07-26-2019

I am at work and can't find the post but there is a vendor that sells the sensors as I have one

It needs to be modified for it to work as noted in prior post.

I can find the vendor later.

Karl · 07-26-2019

If you look around these links you will find the vendor if not I can look later.

http://www.zr1.net/forum/showthread.php?t=30588

Karl · 07-26-2019

The sensor.

https://www.diyautotune.com/product/...sition-sensor/

Pages 3 through 6 are useful.

http://www.zr1.net/forum/showthread.php?t=28584

I have a spare just for the heck of it.

Jetjock · 07-27-2019

Did you do this with a 90 or a 91 for testing? It took all day to take the old sensor out and another day to get it in. The ASR is right in the way and I have large hands. It is done.

32valvZ · 07-27-2019

Quote:

Originally Posted by Jetjock

Did you do this with a 90 or a 91 for testing? It took all day to take the old sensor out and another day to get it in. The ASR is right in the way and I have large hands. It is done.

Wow, that ASR must be a huge PIA.... I was done on my 90 in about 15 minutes, remove and replaced... Did it from under the car.

Jetjock · 07-28-2019

Yes, it was a huge pain. I have a pint of oil on my garage floor from swapping out the sensor. The ASR has a lot of hoses under it that was constantly in the way. Don’t want to do that again anytime soon.

Jetjock · 07-30-2019

Well, replaced the cam sensor and worked on my FX3 right rear timeout. Started up the car and it would barely run. WTF! Shut it down and pulled the code 31. So now I’m going to have to check around the ASR to see if it got put back correctly and check the connection on the cam sensor. It sounded like I only had 4 cylinders.

Jetjock · 07-31-2019

Phil’s inbox is full so I’m posting here. Got the sensor out and added a washer to it to increase the air gap on the sensor. Didn’t work. Ran a little better but still messed up. Tomorrow, I’m going to add another washer to try to increase the air gap a little more. The good news is that I can take apart the ASR and A.I.R. stuff in about 5 minutes. Had no idea that this could happen.

07-26-2019	#11
Karl Join Date: May 2013 Location: Chicago Posts: 980	Re: Cam Sensor Questions I am at work and can't find the post but there is a vendor that sells the sensors as I have one It needs to be modified for it to work as noted in prior post. I can find the vendor later. __________________ 1993 ZR-1 #211 Yellow On Beige Beast #2 1992 ZR-1 #427 Black On Black Sold 1985 L98 Blue On Blue Sold

07-26-2019	#12
Karl Join Date: May 2013 Location: Chicago Posts: 980	Re: Cam Sensor Questions If you look around these links you will find the vendor if not I can look later. http://www.zr1.net/forum/showthread.php?t=30588 __________________ 1993 ZR-1 #211 Yellow On Beige Beast #2 1992 ZR-1 #427 Black On Black Sold 1985 L98 Blue On Blue Sold

07-26-2019	#13
Karl Join Date: May 2013 Location: Chicago Posts: 980	Re: Cam Sensor Questions The sensor. https://www.diyautotune.com/product/...sition-sensor/ Pages 3 through 6 are useful. http://www.zr1.net/forum/showthread.php?t=28584 I have a spare just for the heck of it. __________________ 1993 ZR-1 #211 Yellow On Beige Beast #2 1992 ZR-1 #427 Black On Black Sold 1985 L98 Blue On Blue Sold

07-27-2019	#14
Jetjock Join Date: Mar 2008 Location: Auburn, KY Posts: 555	Re: Cam Sensor Questions Did you do this with a 90 or a 91 for testing? It took all day to take the old sensor out and another day to get it in. The ASR is right in the way and I have large hands. It is done. __________________ Roy L. Carman If I feel the need for speed, I just think about flying the B-777. 1989 Dk Blue Coupe lost in divorce 1991 Black Coupe SOLD 1992 Black ZR-1 #423 SOLD! 1993 Ruby Red 40th Anniversary ZR-1 #334 1995 Black ZR-1 taken by ex-wife 2002 Pewter Coupe no idea where it is 2003 50th Anniversary Corvette #No idea what number SOLD! ZR-1 Net Registry #516 Grand Sport Lifetime Member NCM Lifetime #1468 ZR-1 Net Registry Board Secretary

07-28-2019	#16
Jetjock Join Date: Mar 2008 Location: Auburn, KY Posts: 555	Re: Cam Sensor Questions Yes, it was a huge pain. I have a pint of oil on my garage floor from swapping out the sensor. The ASR has a lot of hoses under it that was constantly in the way. Don’t want to do that again anytime soon. __________________ Roy L. Carman If I feel the need for speed, I just think about flying the B-777. 1989 Dk Blue Coupe lost in divorce 1991 Black Coupe SOLD 1992 Black ZR-1 #423 SOLD! 1993 Ruby Red 40th Anniversary ZR-1 #334 1995 Black ZR-1 taken by ex-wife 2002 Pewter Coupe no idea where it is 2003 50th Anniversary Corvette #No idea what number SOLD! ZR-1 Net Registry #516 Grand Sport Lifetime Member NCM Lifetime #1468 ZR-1 Net Registry Board Secretary

07-30-2019	#17
Jetjock Join Date: Mar 2008 Location: Auburn, KY Posts: 555	Re: Cam Sensor Questions Well, replaced the cam sensor and worked on my FX3 right rear timeout. Started up the car and it would barely run. WTF! Shut it down and pulled the code 31. So now I’m going to have to check around the ASR to see if it got put back correctly and check the connection on the cam sensor. It sounded like I only had 4 cylinders. __________________ Roy L. Carman If I feel the need for speed, I just think about flying the B-777. 1989 Dk Blue Coupe lost in divorce 1991 Black Coupe SOLD 1992 Black ZR-1 #423 SOLD! 1993 Ruby Red 40th Anniversary ZR-1 #334 1995 Black ZR-1 taken by ex-wife 2002 Pewter Coupe no idea where it is 2003 50th Anniversary Corvette #No idea what number SOLD! ZR-1 Net Registry #516 Grand Sport Lifetime Member NCM Lifetime #1468 ZR-1 Net Registry Board Secretary

07-31-2019	#18
Jetjock Join Date: Mar 2008 Location: Auburn, KY Posts: 555	Re: Cam Sensor Questions Phil’s inbox is full so I’m posting here. Got the sensor out and added a washer to it to increase the air gap on the sensor. Didn’t work. Ran a little better but still messed up. Tomorrow, I’m going to add another washer to try to increase the air gap a little more. The good news is that I can take apart the ASR and A.I.R. stuff in about 5 minutes. Had no idea that this could happen. __________________ Roy L. Carman If I feel the need for speed, I just think about flying the B-777. 1989 Dk Blue Coupe lost in divorce 1991 Black Coupe SOLD 1992 Black ZR-1 #423 SOLD! 1993 Ruby Red 40th Anniversary ZR-1 #334 1995 Black ZR-1 taken by ex-wife 2002 Pewter Coupe no idea where it is 2003 50th Anniversary Corvette #No idea what number SOLD! ZR-1 Net Registry #516 Grand Sport Lifetime Member NCM Lifetime #1468 ZR-1 Net Registry Board Secretary

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode