opinions on this wheel

[cuisinartvette]

They will still look good. they may not have the deep lug well but they do have a deeper lip on the rear which is kinda cool.

[Artic93]

Good info guys...problem being , the price is pretty good and unless a nice set of 93 wheels show up that are affordable , these might be ok. I would like to see them on a car first though, if its going to be obvious.

Putting a new set of tires and a new set of wheels on the car for less than $950 bucks....but as they say ...you get what you pay for

[Hammer]

I bought mine from Destroyer. Jeffvette powdercoated them and will stand behind them. Maybe ask him what it would cost to powdercoat yours, that is unless you want the A-Molds. He can do any color you want.

[Artic93]

Is it possible to take a wheel from old chrome to the original finish?

affordably

[Artic93]

Talked to O E Wheels today offset is 56mm Front 50mm Rear

[Aurora40]

I believe that's the GS offsets (front is the same as ours though) for the '91 and later non-ZR1 cars.

[guinnessdood]

Originally Posted by Aurora40

I believe that's the GS offsets (front is the same as ours though) for the '91 and later non-ZR1 cars.

Correct...those are non-ZR-1 offsets for the rear. The fronts are correct. Rear offset is 36MM as previously stated.

See...http://zr1netregistry.com/ZR1_dimensions.htm the chart is at the bottom for wheel offsets

Originally Posted by Aurora40

I believe that's the GS offsets for the '91 and later non-ZR1 cars.

It's for 88-96 cars. The 84-87 requires a 36mm offset front and rear.

[Artic93]

do you all think this will look screwy?? I can only test fit the wheel without the tire mounted to be able to return the wheel for a refund....

With that offset, the wheel is going to be sunk into the fender about 1"