|
01-18-2016
|
#11 |
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,158
|
Re: LED headlight upgrade
Do you have an eBay link? Curious as to what ones you ended up with.
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Shelby Series 1 - Wilwood Brakes Custom Interior NCM Lifetime Member #978 |
|
|
01-18-2016
|
#12 | |
|
Join Date: Aug 2006
Location: McLean, VA
Posts: 3,726
|
Re: LED headlight upgrade
Quote:
|
|
|
|
|
01-18-2016
|
#13 | |
 Join Date: Feb 2007
Location: Komoka, Ontario, Canada
Posts: 597
|
Re: LED headlight upgrade
Quote:
|
|
|
|
|
01-18-2016
|
#14 |
 
Join Date: May 2010
Location: Japan
Posts: 3,098
|
Re: LED headlight upgrade
Awesome!!! Thanks for sharing Yun....I'm all over it.
__________________
Craig "ZR-1 NO KA 'OI" "ZR-1 ICHIBAN" 1995 #228 Black/Black with Dunn Heads ZR-1 owner since September 2003 ZR-1 Net Registry Founding Member #0074 NCM Lifetime Member #2048 
|
|
|
|
01-19-2016
|
#15 |
|
Banned
BANNED
Join Date: Oct 2014
Location: Florida
Posts: 186
|
Re: LED headlight upgrade
Great topic!
|
|
|
|
01-19-2016
|
#16 |
|
Join Date: Aug 2014
Location: Montgomery TX
Posts: 263
|
Re: LED headlight upgrade
WOW! The SlilverStars are good lights... Those Nighthawks are amazing! Thank you, I've been looking at those since i go my Juan...
|
|
|
|
01-19-2016
|
#17 |
Join Date: Aug 2007
Location: Spring TX
Posts: 1,341
|
Re: LED headlight upgrade
any chance of a how to thread for this conversion...it seems a much better option than HID's
|
|
|
|
01-19-2016
|
#18 | |
|
Join Date: Aug 2006
Location: McLean, VA
Posts: 3,726
|
Re: LED headlight upgrade
Quote:
* Rotate headlights half way. I normally turn the headlight switch to full on followed by switch to off position and back to parking light only position when in desired position. Or, use manual knob to rotate to half way position. * Now, two screws on the sides of the light bezel is accessible and remove able. * Remove two T-15 tore head screws on lower edge of the housing. Get ready to catch the housing as these bolts are removed. * With the housing removed four screws for the stainless steel band trim holding the headlight in headlight bucket can be removed. * Pull the headlight forward just enough to expose electrical connector to the headlight and disconnect. * remove headlight. Installation of new LED headlight is the reverse of above steps. Refer to Hib's picture and re-wire driving light ground wire (green wire) to counter inoperable driving lights caused by factory wiring where driving light ground is through the high beam ground: http://www.corvetteactioncenter.com/...age=799_11.jpg Last edited by secondchance; 01-19-2016 at 09:32 PM. |
|
|
|
|
01-21-2016
|
#19 |
Join Date: Jan 2012
Location: Wisconsin
Posts: 885
|
Re: LED headlight upgrade
What the ... ?! You guys drive your Zs at NIGHT?! Isn't that like driving in the rain
 Seriously, this looks like a great upgrade. I know we won't be driving in the snow, but since LEDs don't produce much heat, the lens could get coated with ice. We've had this discussion on a snowplow forum and the big downside is having to clear them off as you're plowing.
__________________
1990 ZR-1 #2180 Red/Black Many of the usual mods for 460HP, tuned by Marc Haibeck ZR-1 Net Registry Member #1548 
|
|
|
|
01-21-2016
|
#20 |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,685
|
Re: LED headlight upgrade
Maybe Robert should look at this as a "group buy" candidate.
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
