Pulling the Plenum for the first time... - Page 2 - ZR-1 Net Registry Forums

tccrab · 08-26-2014

Quote:

Originally Posted by Billy Mild

The car runs a little rough at idle. The local guy seemed to think it ran really rough for a ZR1.

A properly running ZR1 will easily pass the "Nickel Test".

http://www.digitalcorvettes.com/corv...o/1413/cat/508

'Crabs

Billy Mild · 08-26-2014

Quote:

Originally Posted by Schrade

Not necessarily vac leaks...

It could be air getting by the 2' TB butterfly (which I suppose amounts comparably to a vac leak), but not entirely the same.

Cut a gasket withOUT cutting the 2' holes, to re-check idle quality. I did this, and idle was rock-steady. I'll put it back in, when I learn coding.

What would this prove? If it does prove anything how can it be fixed?

Schrade · 08-26-2014

For starters, it can show that you have no vacuum leaks ELSEwhere, and that you have everything ELSE in perfect tune order.

Did in my case anyway.

Fix? None yet...

Billy Mild · 08-26-2014

What are the PCV rubber pieces part numbers? Will Jerry's Gasket be the best place to get these kinds of pieces?

PhillipsLT5 · 08-26-2014

http://www.zr1specialist.com/HAT%20W...enum%20dvd.htm

A26B · 08-27-2014

Quote:

Originally Posted by Billy Mild

What are the PCV rubber pieces part numbers? Will Jerry's Gasket be the best place to get these kinds of pieces?

See if these are the PCV rubber parts you want to replace.

http://jerrysgaskets.com/store2/root...e91f10f4ed35c7

http://jerrysgaskets.com/store2/root...roducts_id=854

http://jerrysgaskets.com/store2/root...roducts_id=855

http://jerrysgaskets.com/store2/root...roducts_id=278

PhillipsLT5 · 08-27-2014

Jerry is Da Man!

Billy Mild · 08-28-2014

Quote:

Originally Posted by A26B

See if these are the PCV rubber parts you want to replace.

http://jerrysgaskets.com/store2/root...e91f10f4ed35c7

http://jerrysgaskets.com/store2/root...roducts_id=854

http://jerrysgaskets.com/store2/root...roducts_id=855

http://jerrysgaskets.com/store2/root...roducts_id=278

Looks like that last one is what I'm looking for. I think mine is leaking just a wee bit. Better replace that now rather than later.

Looks like the parts list is growing. Who know Corvette parts were as expensive or more than Porsche parts...

My wife is rolling her eyes now for encouraging me to pick up this beast. I have a torn apart motorcycle in my garage and now the ZR1 has taken over my "project focus".

Billy Mild · 09-08-2014

What is the best place for vacuum lines and rubber fittings?

Do Vitton gaskets really make a big difference over Buna gaskets? Can o-rings be sourced at the local auto parts store or are they specific to the ZR1?

Harvie · 09-09-2014

Quote:

Originally Posted by Billy Mild

What is the best place for vacuum lines and rubber fittings?

Do Vitton gaskets really make a big difference over Buna gaskets? Can o-rings be sourced at the local auto parts store or are they specific to the ZR1?

Buna and Viton are oring materials not gaskets. There are better than viton also, and real cheap. Just get the oring number and order them from Applied Industrial Tech. or take one in and they will match explain the diferences, and order for you.

08-26-2014	#13
Schrade Join Date: Dec 2012 Location: NC Posts: 1,786	Re: Pulling the Plenum for the first time... For starters, it can show that you have no vacuum leaks ELSEwhere, and that you have everything ELSE in perfect tune order. Did in my case anyway. Fix? None yet... __________________ I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads... ( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b] Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc... 1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3" [IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG]

08-26-2014	#14
Billy Mild Join Date: Aug 2014 Location: Kansas City, MO Posts: 838	Re: Pulling the Plenum for the first time... What are the PCV rubber pieces part numbers? Will Jerry's Gasket be the best place to get these kinds of pieces? __________________ Looking for a ZR-1 1985 Yamaha RZ350-NOT STOCK 1971 Yamaha AT1-Middle of a restoration Last edited by Billy Mild; 08-26-2014 at 10:58 PM.

08-26-2014	#15
PhillipsLT5 Join Date: Aug 2005 Location: Scottsdale, AZ Posts: 2,452	Re: Pulling the Plenum for the first time... http://www.zr1specialist.com/HAT%20W...enum%20dvd.htm

08-27-2014	#17
PhillipsLT5 Join Date: Aug 2005 Location: Scottsdale, AZ Posts: 2,452	Re: Pulling the Plenum for the first time... Jerry is Da Man!

09-08-2014	#19
Billy Mild Join Date: Aug 2014 Location: Kansas City, MO Posts: 838	Re: Pulling the Plenum for the first time... What is the best place for vacuum lines and rubber fittings? Do Vitton gaskets really make a big difference over Buna gaskets? Can o-rings be sourced at the local auto parts store or are they specific to the ZR1? __________________ Looking for a ZR-1 1985 Yamaha RZ350-NOT STOCK 1971 Yamaha AT1-Middle of a restoration Last edited by Billy Mild; 09-08-2014 at 11:30 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode