ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 08-07-2014   #11
Schrade
 
Join Date: Dec 2012
Location: NC
Posts: 1,786
Default Re: exhaust

Quote:
Originally Posted by Franke View Post
Schrade just put on a 3 inch with x pipe, headers and I think no cats. He did say in a post earlier that he had some cabin drone with it. Schrade are you there?
HUH? YOU SAY SOMETHIN'?



You better think twice edramos.

Sounds great from outside. But resonance inside is beyond impressive.

In-cabin drone at low RPM's is HEAVY. It's got to be near the 16Hz range @ low RPM's.

Once I get the water out of the tank, I'll get dB readings for as-is, with cork sheeting in new roof headliner, with more cork sheeting under cargo carpet, and lastly, some type of resonator for 2 x 3" inlet + outlet.
__________________
I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads...

( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b]

Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc...

1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3"

[IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG]
Schrade is offline   Reply With Quote
Old 08-07-2014   #12
edram454
 
edram454's Avatar
 
Join Date: Nov 2013
Location: ..
Posts: 693
Default Re: exhaust

I want to make a change but i don't want a mistake. The flowmaster system is good. there is no drone inside car at any speed. It is probably restrictive and if you want a meaner sound then a different system is required or a modification of the current system is in order. It is a crap shoot as to what to change on the current system. some say the resonator is the problem/ some say its the mufflers?? It would be horrible to cut up the system only to find out the modifications are less than desirable.

The flowmasters sound very good at wot but just not aggressive enough at idle or low speeds. I have seen that flowmaster makes the 44 series and the 40 and the 10. the ten is for race cars and its a one chamber muffler. it sounds ratty and too crude so its not a nice sound. the 40 and 44 series are two chamber desire and sound nice. Maybe that is the ticket??
edram454 is offline   Reply With Quote
Old 08-08-2014   #13
mike100
 
Join Date: Feb 2011
Location: San Marcos CA
Posts: 1,802
Default Re: exhaust

Quote:
Originally Posted by edram454 View Post
It would be horrible to cut up the system only to find out the modifications are less than desirable.
Who here hasn't had at least 3 exhaust systems. For me it has been about 1 per year.
mike100 is offline   Reply With Quote
Old 08-08-2014   #14
edram454
 
edram454's Avatar
 
Join Date: Nov 2013
Location: ..
Posts: 693
Default Re: exhaust

yeah on my other cars I have bought many exhaust systems. they can get quite pricey. I dont want to make that mistake plus I have no where to keep take off systems. I will wait a while and see what surfaces. I like the sound of the corsa's only with headers and no cats. Hopefully somebody wants to change to another system and sells their corsa.
edram454 is offline   Reply With Quote
Old 08-08-2014   #15
KILLSHOTS
 
Join Date: Feb 2014
Location: AZ
Posts: 860
Default Re: exhaust

I'm on my 3rd since February!
KILLSHOTS is offline   Reply With Quote
Old 08-08-2014   #16
KILLSHOTS
 
Join Date: Feb 2014
Location: AZ
Posts: 860
Default Re: exhaust

Quote:
Originally Posted by edram454 View Post
yeah on my other cars I have bought many exhaust systems. they can get quite pricey. I dont want to make that mistake plus I have no where to keep take off systems. I will wait a while and see what surfaces. I like the sound of the corsa's only with headers and no cats. Hopefully somebody wants to change to another system and sells their corsa.
Yeah Ed, I jacked around trying to find a less expensive option. I ended up with stock catted manifolds into straight pipes and it sounded AMAZING! Then I remembered I wanted headers and that would have been FAR too loud with those straight pipes. Like you, I didn't care much about drone at the time. I love the deep sound of B&B but wanted a custom system with an x-pipe and black tips, and the price they quoted me was ridiculous, even though I'm local. In the final analysis, I decided that since I was spending $1400 on a frigging catback (I have the black-tip Corsa...more expensive) I wanted to have it ALL, including no drone. I'm glad I stopped experimenting and spent the money on the only (IMHO) true best-of-both-worlds exhaust system. Hope this helps somewhat. Good luck!

Last edited by KILLSHOTS; 08-08-2014 at 12:54 AM. Reason: spelling
KILLSHOTS is offline   Reply With Quote
Old 08-08-2014   #17
edram454
 
edram454's Avatar
 
Join Date: Nov 2013
Location: ..
Posts: 693
Default Re: exhaust

yes it does help. If I want the sound of a headers/no cat Corsa, I need to buy one.


ed ramos #3028
edram454 is offline   Reply With Quote
Old 08-08-2014   #18
Schrade
 
Join Date: Dec 2012
Location: NC
Posts: 1,786
Default Re: exhaust

Quote:
Originally Posted by edram454 View Post
I want to make a change but i don't want a mistake. The flowmaster system is good. there is no drone inside car at any speed. It is probably restrictive and if you want a meaner sound then a different system is required or a modification of the current system is in order. It is a crap shoot as to what to change on the current system. some say the resonator is the problem/ some say its the mufflers?? It would be horrible to cut up the system only to find out the modifications are less than desirable.

The flowmasters sound very good at wot but just not aggressive enough at idle or low speeds. I have seen that flowmaster makes the 44 series and the 40 and the 10. the ten is for race cars and its a one chamber muffler. it sounds ratty and too crude so its not a nice sound. the 40 and 44 series are two chamber desire and sound nice. Maybe that is the ticket??
I don't at all regret this hardware - my motor is running MUCH cooler with it - there's NO doubt about it. If I could readily put OEM hardware back on and spec it for difference, I would.

But I do want to decrease interior drone here, without getting any restriction back - won't be east to do right...
__________________
I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads...

( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b]

Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc...

1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3"

[IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG]
Schrade is offline   Reply With Quote
Old 08-08-2014   #19
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,709
Default Re: exhaust

Quote:
Originally Posted by mike100 View Post
Who here hasn't had at least 3 exhaust systems. For me it has been about 1 per year.
I started out w 1 7/8" Watsons w 3G B+B. DRONE.
Went to headers w MagnaFlow 3" Cat-Back including resonator. Nice exhaust but more restrictive although it still made 399rwhp.
Now my final configuration is headers, SW Xpipe, DynoMax UltraFlows w
NPP Z06 tips and full open on/off switching. This is the exhaust I'm sticking with.
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman
Former ZR-1 Registry - BOD
1972 Corvette 4speed base Coupe SOLD long time ago
1984 Corvette Z-51/4+3 SOLD
1992 Corvette ZR-1 Aqua/Gray #474 SOLD
1992 Corvette ZR-1 Black Rose/Cognac #458
2014 Honda VFR Interceptor DX
XfireZ51 is offline   Reply With Quote
Old 08-08-2014   #20
KILLSHOTS
 
Join Date: Feb 2014
Location: AZ
Posts: 860
Default Re: exhaust

Quote:
Originally Posted by Schrade View Post
I don't at all regret this hardware - my motor is running MUCH cooler with it - there's NO doubt about it. If I could readily put OEM hardware back on and spec it for difference, I would.

But I do want to decrease interior drone here, without getting any restriction back - won't be east to do right...
Hey Schrade, Daryll (GoldCylon) had (probably still has) a Corsa resonator for sale. It's 2.5" but a totally straight-through design. Might be a way to reduce your drone without adding restriction.
KILLSHOTS is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:48 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020