Who sells a quality door strip belt molding strip? (upper door by window ) ---

[VetteVet]

Originally Posted by Fully Vetted

Good luck. I couldn't find it here.

This link is a little more specific. $38.00 for outer and $30.00 for inner.

http://keenparts.com/pages/Catalog3....3035&year=1991

I've had nothing but good experiences with Keen.

Jep

[Fully Vetted]

Aah...listed as a door seal and not weatherstrip.

[Cal55]

How difficult are the outer ones to change? I assume you have to remove the door panel.
Thanks,
Joe

[Fully Vetted]

You'll need a rivet gun. Take off the door panel, drill out the rivets and then reverse the process.

[Cal55]

Originally Posted by Fully Vetted

You'll need a rivet gun. Take off the door panel, drill out the rivets and then reverse the process.

Thanks for the information, that doesn't sound like it's too bad of a job. My passenger side has a crack in it, but it's not very noticeable so I may leave it for now.
Joe

[Fully Vetted]

If I was going to do one I would go ahead and do both. May save some time refamiliarizing yourself with the process. And you already have your needed tools out. Most likely you'll be buying a pair anyway since I think that's the only way you can buy them.

[Cal55]

Originally Posted by Fully Vetted

If I was going to do one I would go ahead and do both. May save some time refamiliarizing yourself with the process. And you already have your needed tools out. Most likely you'll be buying a pair anyway since I think that's the only way you can buy them.

Good point, usually the second time goes much smoother. I'll take a closer look at it when the weather breaks, which should be soon hopefully!
Thanks,
Joe